I am building a new rig and am having some problems with the sata boot drive.
Below are my spec's.
Asus P5GDc Deluxe
Intel 775 3.0 Prescot
1 Gb (2x512) Corsair twinx1024-3200c2rt ddr400
Ati X700 Pro, 256 meg ddr3 (pcie-x16)
Samsung 120 Gb Sata sp1213c (boot drive)
Nec 3500A dvd-cd burner (primary ide (pri_ide1))
Antec Sonta Case
I am not planning on any overclocking. everthing set at default options. The sytem seems to work fine, but I want to make sure everthing is working at its best config. In the bios it dectects my primary ide master = nec3500a, primary ide slave - not detected, third ide master - samsung sp1213c, remaining ide are all not detected. I have the samsung hardrive set as the 1st boot device, nec3500a as 2nd boot devise, and 1st ffloppy drive as 3rd boot divise. Under the ide configuration menu I have configure sata as (standard ide), onboard ide operate mode (enhaced mode) and the enhanced mode support on (sata mode)
As I mentioned the system boots and seems to run fine. I am hoping that all my sata drive settings are correct so as I can get the best preformace from my sata drive. Please can anybode let me know if my system is set up properly
Below are my spec's.
Asus P5GDc Deluxe
Intel 775 3.0 Prescot
1 Gb (2x512) Corsair twinx1024-3200c2rt ddr400
Ati X700 Pro, 256 meg ddr3 (pcie-x16)
Samsung 120 Gb Sata sp1213c (boot drive)
Nec 3500A dvd-cd burner (primary ide (pri_ide1))
Antec Sonta Case
I am not planning on any overclocking. everthing set at default options. The sytem seems to work fine, but I want to make sure everthing is working at its best config. In the bios it dectects my primary ide master = nec3500a, primary ide slave - not detected, third ide master - samsung sp1213c, remaining ide are all not detected. I have the samsung hardrive set as the 1st boot device, nec3500a as 2nd boot devise, and 1st ffloppy drive as 3rd boot divise. Under the ide configuration menu I have configure sata as (standard ide), onboard ide operate mode (enhaced mode) and the enhanced mode support on (sata mode)
As I mentioned the system boots and seems to run fine. I am hoping that all my sata drive settings are correct so as I can get the best preformace from my sata drive. Please can anybode let me know if my system is set up properly