• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Asus P4S333 and temps

N

Nucro

Member
Asus Probe does not show the temps right. IT's always at 40C and today for the first time it was @41 C when I oc'd 1.6 to 2133@1.575v.
I think the bios shows the temps right but Ýsn't there a program which shows the accurete temps ?

Also there is no 1/4 pci mutipler below 133 fbs. Why??
 
Something is wrong with either the Sis645 or the P4S333 sensors. I am yet to find a proggy to read the temps correctly. Since i did a few reboots into Bios and have a general idea what the temps are (32C idle and 41C load at 2.3Ghz at 1.55v) it really does not matter anymore. This is a real super board and so darn easy to set up and overclock and best of all at a good price.
 


<< Also there is no 1/4 pci mutipler below 133 fbs. Why?? >>



lol - do you believe everything your bios tells you?

its wrong - there is a 1/4 pci, it just doesnt say so.
 
And how do you select 1/4 pci mutipler below 133 fbs? Is it something with the jumpers on the mobo?
Actually I don't need that multipler but I'm just curios 🙂
 
You could flash the bios and change to an updated version that allows you to overclock your processor to 10 gigahertz so it freezes before you even turn it on. 🙂
 
Forget the 1/4 divider below 133MHz, ASUS needs to get up off its a$$ and come up with a 1/5 divider. 🙂
 
they all need to get off their @sses and make a fully adjustable bios.

there is no reason why they cant - they just dont want to 🙁
 
Heh if you guys had your way, you would just want a spot where you can set the cpu speed, memory speed, pci speed, agp speed....none of these damn dividers 🙂...anyway, I noticed the bios on my p4s333 is strange in that changing the bios vcore settings dont seem to apply until after i go into windows and back...its very odd....however asusprobe seems to work fine...it reports the vcore settings and the cpu temp....right now i have the bios vcore setting to 1.625v and asusprobe shows 1.664 and my cpu temp shows 41C idle and 56C with prime95 so all seems good.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top