- Mar 3, 2005
- 1
- 0
- 0
I just finished builiding my system with these specs:
Ultra-X Connect 500W PSU
ASUS A8N-SLI Deluxe
AMD 64 3500+ Winchester/XP-120
Corsair 1GB(512*2) XL 2-2-2-5 RAM
2*160GB Seagate Barracudas NCQ
Lite-On 16X Dual Drive
Lite-On CDR-W Drive
I used my old Radeon 32MB PCI video card because I haven't bought the PCI-E video card yet and there was no signal at all. When I turn computer on it turns on normally (all of the fans go active, led become active) but there is no signal to my monitor and there are no beeps that I can hear. Its like the monitor is in stand-by mode and it won't come on.
Does anyone have any suggestion what the problem could be. By the way I use 20 to 24pin adapter since the PSU came with 20pin.
Ultra-X Connect 500W PSU
ASUS A8N-SLI Deluxe
AMD 64 3500+ Winchester/XP-120
Corsair 1GB(512*2) XL 2-2-2-5 RAM
2*160GB Seagate Barracudas NCQ
Lite-On 16X Dual Drive
Lite-On CDR-W Drive
I used my old Radeon 32MB PCI video card because I haven't bought the PCI-E video card yet and there was no signal at all. When I turn computer on it turns on normally (all of the fans go active, led become active) but there is no signal to my monitor and there are no beeps that I can hear. Its like the monitor is in stand-by mode and it won't come on.
Does anyone have any suggestion what the problem could be. By the way I use 20 to 24pin adapter since the PSU came with 20pin.