asrock duel sata oc'ing

[SpeedZealot369]

The fsb is locked at 200, It lets me change the multiplyer but not the actual fsb, wierd? It's there but when I press enter to try to increase nothing opens up, as if I didn't press enter at all.

Also theres no htt anywhere, I'm talking about the thing thats usually set at 5x and you need to lower it to 4x or 3x, its not there, wierd?

Any help would be appreciated, I tried searching but there's so much out on that board.

Thanks


*Can I just raise the multiplyer and leave dram at 200? aka no devider*

 

[Cruise51]

Try pressing +/- keys. Htt might be in a different section of bios, and may not be labelled "htt".

 

[emilyek]

Use +/- and arrow keys.

Under CPU configuration set pci to htt to 'async'

Turn off Fexibility Option if you know what you are doing. It sets RAM dividers on its own, usually at very consevative speeds.

Set your memory dividers and basic timings manually.

HTT is under 'Chipset Configuration' as 'NB to CPU'.

Values are 1000mhz/800/600/400/200 for 5x 4x 3x etc.

Just mess with the very first one, for HTT.

You can leave all the rest (and the 'width' to auto.)

 

[Wnh5001]

under the fsb enter a number in, ie 240 and press enter.

 

[Zepper]

Go to http://www.ocworkbench.com - they usually have all the good info on that mobo along with hacked and/or beta BIOSes. All to let you take a chance and do what the mfr never intended...

.bh.

 

[imported_Claymore]

Zepper is right. OC Workbench has been a great ref for me too. The answer to your specific question though is that unlike the rest of the UI, in this particular field you have to use the +/- keys to adjust. I easily got my Venice 3000 to 2.44Ghz with no pain, Stock voltage, and stock OEM Fan air cooling. Good luck!