• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

are most all digital multimeters accurate?

I'm not an electrician myself but I hear a lot from my electronics buds that Fluke multimeters are some of the best ones around.
 
Yes
even the cheapest digital watch keeps good time.
Fluke will give you higher capacities, ruggedness, warranties, optional equipment.
'Brand name electronics'
 
Pretty much any digital multimeter will have adequate accuracy and precision for general purpose use. Specialist, or scientific, uses are more stringent.

However, you should never place a high level of trust on the accuracy of a reading unless you have a current calibration certificate for the meter in question. E.g. if you're an electrician and install a new circuit, you would always check the supply and earth loop impedence when finished. However, if the building subsequently burned down, you'd be making sure you had the copy of your test report and the meter test certificate that was valid at the time.
 
Yes, but if you are going to have to have it used in a field or job where it requires accuracy, you can get it calibrated and certified.
Tas.
 
Originally posted by: tasburrfoot78362
Yes, but if you are going to have to have it used in a field or job where it requires accuracy, you can get it calibrated and certified.
Tas.

Or just use a differential voltmeter.

Fluke, Beckman, Fieldpiece...
All are pretty accurate.

I also like to keep a Simpson 260 around for audio measurements
 
I prefer a good analog meter, but I own a couple of cheap radio shack digitals. They get the job done and are definitely as acurate, if not more acurate than my anaolog.
 
Back
Top