Anyone with Asus P8P67 Deluxe? What to do with the USB 3.0 box?

Toggle sidebar Toggle sidebar
D

Doggiedog

Lifer
Aug 17, 2000
12,780
5
81
What the heck are you supposed to do with the USB 3.0 box that comes with the MB? There's no panel or anything to connect it to the front of the PC case. Are you supposed to drill a hole somewhere in the case and have the box hang out of the case? So far, I don't have anything USB 3.0 so I'm keeping it inside the case until I need it.
 
SlitheryDee

SlitheryDee

Lifer
Feb 2, 2005
17,252
19
81
I only have the regular P8P67, but I'm looking at pics on the internet. It seems like it should fit in a floppy drive bay and I think I see screw holes in the sides. Have you tried that?
 
D

Doggiedog

Lifer
Aug 17, 2000
12,780
5
81
SlitheryDee said:
I only have the regular P8P67, but I'm looking at pics on the internet. It seems like it should fit in a floppy drive bay and I think I see screw holes in the sides. Have you tried that?
Click to expand...

Hmm. I bought an Antec 300 Illusion. I looked around and there are no screws or any place to put the box. It seems almost like an external drive.
 
B

bankster55

Golden Member
Mar 24, 2010
1,124
0
0
Fits right in the floppy module in the Antec 900
comes with the screws that go into the side holes
very nice for USB 3.0 right on the front
P67 has no floppy, so you lose nothing
 
W

Wizlem

Member
Jun 2, 2010
94
0
66
Spike said:
Do NOT get something like that, it will not work for this. The box is already 3.5", that adapter will not work as it converts something down to 2.5".
Click to expand...

Sure looks like a 5.25" to 3.5" bay converter to me in the link.
 
N

Numenorean

Diamond Member
Oct 26, 2008
4,442
1
0
Spike said:
Fits in my P180 floppy spot (a little tight but still fits) and I have my SSD mounted to it. It was just about exactly what I needed for my new build.




Do NOT get something like that, it will not work for this. The box is already 3.5", that adapter will not work as it converts something down to 2.5".
Click to expand...

The 3.5 Inch to 5.25 Inch Drive Bay Adapter with Black Bezel mounts your 3.5 inch drives into a 5.25 bay drive.

wut?
 
mclaren777

mclaren777

Member
Jan 3, 2011
135
0
76
How do you remove the screw holding the CPU in on a P8P67? I was expecting a special key drive but I can't find one in the box.
 
M

Manticorps

Member
Jan 27, 2006
84
0
61
mclaren777 said:
How do you remove the screw holding the CPU in on a P8P67? I was expecting a special key drive but I can't find one in the box.
Click to expand...

Unless I'm misunderstanding, it isn't held in by a screw. There is a lever that you raise and lower to lock the CPU in place.
 
mclaren777

mclaren777

Member
Jan 3, 2011
135
0
76
There is also a screw.

myfyc.jpg
 
C

corpfan1

Member
Jan 11, 2011
31
0
0
According to the manual the screw is there.

But, it shouldn't interfere with the latch opening or closing.
 
D

Doggiedog

Lifer
Aug 17, 2000
12,780
5
81
The screw there is to hold the mount in place.

Basically, you push the lever down and outwards to the side. The mount that clamps down on the chip will pull back and up. You put the chip in and close the mount, push the lever back down and inwards and you are set. You don't do anything to the screw. It's only there to hold the mount down in place.
 
mclaren777

mclaren777

Member
Jan 3, 2011
135
0
76
Can I ask another dumb question for good measure? ;)

My P8P67 motherboard has the following fan ports...

1 x CPU Fan connector (4-pin)
2 x Chassis Fan connectors (4-pin; 3-pin)
1 x Power Fan connector (3-pin)

I bought a stand-alone controller that supports four fans and I'm wondering if I should send it back and just control the fans with software instead. Theoretically I could just run my three case fans from the Chassis/Power fan ports, right? Would there be any harm in plugging a 3-pin fan into a 4-pin port (see image below)? The manual for my P8P67 doesn't address this question, though I'm guessing it should work fine as long as I use the right-most pins (the ones nearest the plastic tab). Right?

ldebB.jpg



My other question relates to the Power Fan connector. If my Google research is correct, that port is meant to monitor the fan speed of the PSU, but I'm unsure of whether it has regulatory control or not. Do any of you have experience with this feature? My PSU doesn't support fan monitoring so I'd rather use that port for controlling another case fan, if possible.

1JW5o.jpg
 
M

Manticorps

Member
Jan 27, 2006
84
0
61
You can plug a three pin fan into a 4 pin port, just plug it into the side that has the "tab", and it will run full speed. I don't think you will be able to control the fan speed on a non PWM fan (4 pin) connected to the 4 pin header; I haven't figured out how yet anyway.

I experimented with Fan Xpert and couldn't get it to control the speed of any of my 3 pin fans, though I didn't work too hard at it. I tried it, failed and gave up.

I have an H70 that i would love to be able to control fan speed on. I have resigned myself to buying a couple of PWM fans or a fan controller if I want to be able to vary the fan speed on the fly.

Edit: I haven't used the "Power Fan" connector. I thought it was just to monitor the PSU fan, and mine is off most of the time anyway.
 
M

MrTransistorm

Senior member
May 25, 2003
311
0
0
Manticorps said:
I don't think you will be able to control the fan speed on a non PWM fan (4 pin) connected to the 4 pin header; I haven't figured out how yet anyway.
Click to expand...
On Gigabyte boards you can switch between PWM and voltage control in BIOS setup. I think it's only for the CPU fan though (other headers can detect the fan speed but not control it). I'd be surprised if other maker's boards didn't have the same option.
 
M

Manticorps

Member
Jan 27, 2006
84
0
61
MrTransistorm said:
On Gigabyte boards you can switch between PWM and voltage control in BIOS setup. I think it's only for the CPU fan though (other headers can detect the fan speed but not control it). I'd be surprised if other maker's boards didn't have the same option.
Click to expand...

Thank you for this. It seems that the CPU fan does indeed require a PWM fan to control fan speeds, the Chassis Fan headers work fine with 3 Pin fans. I only tried the CPU fan header before. I can now control the 3 pin fan speeds using "Fan Xpert" when the fans are plugged into the Chassis headers on the motherboard.
 
Last edited:
M

MrTransistorm

Senior member
May 25, 2003
311
0
0
Manticorps said:
Thank you for this. It seems that the CPU fan does indeed require a PWM fan to control fan speeds, the Chassis Fan headers work fine with 3 Pin fans. I only tried the CPU fan header before. I can now control the 3 pin fan speeds using "Fan Xpert" when the fans are plugged into the Chassis headers on the motherboard.
Click to expand...
You're right. I just looked through the P8P67 Deluxe manual, and I didn't see anything about being able to control 3-pin fans on the CPU fan header. That's unfortunate since many good fans are 3-pin.

Well, at least you gained control through Fan Xpert on the Chassis headers. Is it automatic (temp controlled) or manual?
 
M

Manticorps

Member
Jan 27, 2006
84
0
61
MrTransistorm said:
You're right. I just looked through the P8P67 Deluxe manual, and I didn't see anything about being able to control 3-pin fans on the CPU fan header. That's unfortunate since many good fans are 3-pin.

Well, at least you gained control through Fan Xpert on the Chassis headers. Is it automatic (temp controlled) or manual?
Click to expand...

I have them setup as automatic/temp controlled, just did a quick and dirty profile with three temperature/speed points and works as advertised.

Originally, I had the Corsair H70 pump connected to the Chassis Header and the fans connected to the CPU header per Corsair's instructions. After reading your post, I started messing around with Fan Xpert and noticed that I could control the pump's speed on the Chassis header and could not control the speed on the CPU header. Switched the connections: Pump to CPU header and Fans to Chassis header and all is well.
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom