ANyone did OC based on AMD63 3000+ (939) and Asus A8v MB

[dejunjing]

Thanks

 

[rocketman14]

i was interested in this too. what's the max fsb you guys have reached with this board?

 

[imported_NoGodForMe]

You can read all about my system here.
http://www.nogodforme.com/MyBabyTera.htm
The highest I can go is 231mz. I think it's my memory because I'm cooling on water. I've order G.Skill LE memory to replace my Corsair.
I've heard the A8V can OC to 260mz, so if I'm still stuck after the new memory arrives, then it must be an unlucky chip, but I'm gonna find out once and for all.

 

[e4te]

I just got these both for christmas and built my system.
Lets see, I had it at 244 and stress tested for 8 hours with no problems. I have 1gb corsair xms. Right now I am stress testing (writing this from school) it at 266 fsb, and it was fine when i checked it after 8hours. I'm going to let this go for at least 20 hours to see how it goes. I am on stock cooling, and my temps at 266fsb are 39C idel/~50C load. Hopefully it can hold up because the difference between 1.8 and 2.4 is pretty substantial. The v-core is at 1.55, HHT at 800, and ram voltage at 2.6 (i think). Good luck!

 

[brazzmunk]

275fsb, had prime running for 9h stable... memory at 209Mhz it could go up to 285Fsb but my video card fails

 

[JC]

I can run mine as high as 275HTT (5x!), 1.55v, stock HSF. I prefer to run it around 260HTT and 1.45v, though.
Oh yeah, Corsair XMS3200LLPT. Lowering the HTT multi doesn't seem to help.


JC

 

[crowdx]

I am waiting on delivery of the Asus A8N-SLI and an Athlon64 3000+, I have OCZ PC3200 memory, what can I expect to get out of this cpu? I presently run the OCZ with my Barton 2500+ at 220mhz, (Barton clocked to 2.1ghz) I presume the multiplier is locked on the Athlon64? Is it all down to how high my memory can run?
TIA
Patrick

 

[Thor86]

Originally posted by: rocketman14
i was interested in this too. what's the max fsb you guys have reached with this board?

277fsb, HT=800(4x?), Memory Mode=Limited, 3:2ratios