Anyone crack'n with a 386 - 16mhz puter?

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

MadRat

Lifer
Oct 14, 1999
11,999
308
126
No joke, but I use a 486-sx25 IBM laptop to crack RC5. I think it gets 90kkeys/sec.
 

networkman

Lifer
Apr 23, 2000
10,436
1
0
I'm wondering if I should even bother with setting up this P-60 to do RC5... at a rate of just 84Kkey/sec, I don't know if it's even worth bothering with.. :confused:

As to the XT/AT issue.. the XT ran at 4.77 MHz, the AT started at 6 MHz; not sure about the 32bit factor, but the 386sx wasn't really a 32bit processor anyways.. it could read from the memory at 32 bits but could only write back at 16 bits, hence the 386sx was really just a souped-up 16bit processor.
 

Diffusion

Senior member
Oct 19, 2000
467
0
0
16mhz motorola 68030 chip(I think) , it has yet to finish a block, I shut it down after 4 days. Do I get the board for a crack rack yet? =P.
 

Fardringle

Diamond Member
Oct 23, 2000
9,200
765
126
Yep, you're right, it was an XT (I thought it was a 4.1Mhz, but you could be right about 4.77Mhz as well, since it's late, and my memory isn't what it used to be.. :))

Perhaps only some clients require a 32-bit processor? This system seemed to work with the MS-DOS client...
 

vss1980

Platinum Member
Feb 29, 2000
2,944
0
76
I'd be quite impressed if a 286 managed to find the correct key.

As for the 386sx. It was 32-bit core, but it was meant to be for the cheaper sector of the market at the time, so it was only given a 16-bit bus. The chip is classed as 32-bit.
 

Kilowatt

Golden Member
Oct 9, 1999
1,272
0
0
I remember when I was testing Klinux on an old 486 SX 25 machine with 8MB of memory.

It found the nic, found the pproxy, loaded a couple of 1^*28 blocks and started the cruncher.
Buy the time I went to the bathroom, went out in the warehouse to have a smoke, then talked on the phone for a few minuets, there was still nothing but a curser flashing.

So, thinking the client had froze up, I restarted the client and it showed an R. :Q
 

phule

Senior member
Jan 22, 2001
233
0
0
I'd be quite impressed if a 286 managed to find the correct key.

so would I, given that the client won't run on a 286.

The lowest you can go is a 386.
 

Jarhead

Senior member
Oct 29, 1999
550
0
0
Boy, sounds like an opportunity...for all of the ultimate hard core
RC5 folks:

For Sale:
Compaq 386SX-20 motherboard, integrated sound/video.
Acer 486DX-25 motherboard, integrated sound/video.
Various brand motherboards w/486DX-25.
Various brand motherboards w/486DX-33.
Various brand motherboards w/486DX2/66.
One motherboard with a 5x86-p75-133 Kennsington Overdrive.

Misc AT cases w/o covers.

Make offer!

(wow, I'm gonna be rich!!!)

NOT