• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Anthon 3000+

C

car24fan

Junior Member
I just purchased a Athlon 3000+ 333 mhz FSB processor. For some reason the processor on runs at 2125 mhz. I am also getting alot of computer reboots. First is there a away to make the processor run faster? (2) why am I getting the reboots. I had the Athlon 2600+ which is a better processor?

System Components:

Soyo KT400 Dragon Lite motherboard
Maxtor Diamond 9 120GB ATA 133
Maxtor Diamond 8 40 GB ATA 133
Maxtor SATA 150 and ATA 133 Combo Card (This runs both of the Hard Drives)
1280Ghz in PC 2700 memory
Lite on DVD/CD Combo Drive
Sony 4x Dvd Writer (Both CD Roms are hook to IDE 1 on the MB)
2 Case Fans
ATA 133 cool master cables on both the CD Roms and both hard drives
Cool master cable on the floppy drive also
Windows 2000 Professional Service Pack 4

Please review and make suggestions if I can run my system better. I am open for ideas. Thanks

 
Originally posted by: car24fan
I just purchased a Athlon 3000+ 333 mhz FSB processor. For some reason the processor on runs at 2125 mhz. I am also getting alot of computer reboots. First is there a away to make the processor run faster? (2) why am I getting the reboots. I had the Athlon 2600+ which is a better processor?

System Components:

Soyo KT400 Dragon Lite motherboard
Maxtor Diamond 9 120GB ATA 133
Maxtor Diamond 8 40 GB ATA 133
Maxtor SATA 150 and ATA 133 Combo Card (This runs both of the Hard Drives)
1280Ghz in PC 2700 memory
Lite on DVD/CD Combo Drive
Sony 4x Dvd Writer (Both CD Roms are hook to IDE 1 on the MB)
2 Case Fans
ATA 133 cool master cables on both the CD Roms and both hard drives
Cool master cable on the floppy drive also
Windows 2000 Professional Service Pack 4

Please review and make suggestions if I can run my system better. I am open for ideas. Thanks
Click to expand...

That is the proper mhz or pretty close to it(hopefully someone can confirm that). As for your reboots it could be a number of things.

1) I assume your 2600+ was a 266mhz fsb cpu, if you had set you ram to CAS 2(or if BIOS automatically selected CAS 2) then that could be the problem. Try using CAS 2.5 then 3.0 if 2.5 doesn't fix the problem

2) Get the latest version of the motherboards BIOS

3) Make sure your FSB is set to 166mhz and not 165 or lower/close to 166

4) Ckeck your voltages, if you Power Supply is too weak it may not provide enough Voltage.
 
Power Supply.

Even though I had a 400 Watter I had to get one that had what they call 5 & 12 volt "boost" for P4 and Athlon Bartons.

 
Since you have PC2700 ram, it's most likely your power supply. What psu do you have? If it's the one that came with the case, you're gonna need a bigger, badder one.
 
Besides your PSU bonking, I'd check to be certain that your heatsink is making proper contact and monitor the temps. Also, are you using the latest bios for your board?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top