Originally posted by: CitizenHaax
With 10 scsi drive you would be better off with something that can handle that much amperage draw on the 12 volt line- since most high performace drives can draw 2amps each. Thats 20amps for the drives if they were all running at once. You add the draw from a AMD or Intel chip thats another 8-9amps - then you have misc. draw from the motherboard and other devices. You would need at least 30amps
Then you get into the 3.3v line for AMD boxes and 5v line for other stuff. This Antec 550w is underpowered for your application.
ANTEC TruePower 550
5v=40a
3.3v=32a
12v=24a
All lines equal 530watts as stated on their website and with the high amp rating on the 3.3v and 5v it means the PSU is concentrating on those more and leaving less for the 12v
A better choice for your application is the
Enermax EG651P 550w
5v=36a
3.3v=36a
12v=36a
+3.3V & +5V=200W Leaving the 12v line upwards of 350w
or even the
Enermax EG465P-VE FC 460w
5v=35a
3.3=35a
12=33a
+3.3V & +5V =200W Leaving 12vline upwards of 260w