Will this power supply with 20 pin connector be good enough for my new build?
Opteron 146
DFI Ultra-D
G.Skill 2gb(2x1gb) PC4000
Sapphire x1800xt 512 MB
Specs copied from antec.com
FEATURES
Maximum Power
480 Watts
Switches
ATX Logic on-off
additional power rocker switch 115/230 Volt selector switch
Special Connectors
AUX Power
ATX12V
3-pin Fan Sensor
Fan Only
SATA
Transient Response
+5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
P. G. Signal
100-500ms
Over Voltage Protection
recycle AC to reset
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V
Leakage Current
<3.5mA @ 115VAC
DIMENSIONS
Unit Size
5.9"(L) x 5.5"(W) x 3.4"(H)
15cm(L) x 14 cm(W) x 8.6 cm(H)
Net Weight
5lbs.
2.3kg
INPUT
Input Voltage
115 VAC / 230VAC
Input Frequency Range
47Hz to 63Hz
Input Surge Current
< 60A @ 115VAC
Input Current
9.0A for 115VAC
5.0A for 230VAC
Hold-up Time
>17ms at Full Load
Efficiency
> 68%
EMI/RFI
FCC Class B
CISPR22 Class
OUTPUT
+5V
-5V
+12V
-12V
+3.3V
+5V
SB
Max. Load
38A*
0.5A
28A*
1.0A
30A*
2A
Min. Load
0A
0A
0.8A
0A
0A
0A
Load Reg.
±3%
±5%
±3%
±5%
±3%
±5%
Ripple V(p-p)
50mV
50mV
120mV
120mV
50mV
50mV
* +5V, +3.3V & +12V maximum output 460 Watts max.
ENVIRONMENTAL
Operating Temp.
10 to 50ºC
Operating Alt.
Sea Level 10,000 ft.
Non-Operating Vibration
Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
MTBF
80,000 hrs. @ 25ºC
Approvals
UL, TUV, CB, VDE, FCC CLASS B, DEMKO, NEMKO, SEMKO, FIMKO
Opteron 146
DFI Ultra-D
G.Skill 2gb(2x1gb) PC4000
Sapphire x1800xt 512 MB
Specs copied from antec.com
FEATURES
Maximum Power
480 Watts
Switches
ATX Logic on-off
additional power rocker switch 115/230 Volt selector switch
Special Connectors
AUX Power
ATX12V
3-pin Fan Sensor
Fan Only
SATA
Transient Response
+5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
P. G. Signal
100-500ms
Over Voltage Protection
recycle AC to reset
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V
Leakage Current
<3.5mA @ 115VAC
DIMENSIONS
Unit Size
5.9"(L) x 5.5"(W) x 3.4"(H)
15cm(L) x 14 cm(W) x 8.6 cm(H)
Net Weight
5lbs.
2.3kg
INPUT
Input Voltage
115 VAC / 230VAC
Input Frequency Range
47Hz to 63Hz
Input Surge Current
< 60A @ 115VAC
Input Current
9.0A for 115VAC
5.0A for 230VAC
Hold-up Time
>17ms at Full Load
Efficiency
> 68%
EMI/RFI
FCC Class B
CISPR22 Class
OUTPUT
+5V
-5V
+12V
-12V
+3.3V
+5V
SB
Max. Load
38A*
0.5A
28A*
1.0A
30A*
2A
Min. Load
0A
0A
0.8A
0A
0A
0A
Load Reg.
±3%
±5%
±3%
±5%
±3%
±5%
Ripple V(p-p)
50mV
50mV
120mV
120mV
50mV
50mV
* +5V, +3.3V & +12V maximum output 460 Watts max.
ENVIRONMENTAL
Operating Temp.
10 to 50ºC
Operating Alt.
Sea Level 10,000 ft.
Non-Operating Vibration
Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
MTBF
80,000 hrs. @ 25ºC
Approvals
UL, TUV, CB, VDE, FCC CLASS B, DEMKO, NEMKO, SEMKO, FIMKO
