AMD system: So whos running 200Mhz CPU/RAM in sync

[lundog22]

Originally posted by: Technonut
ABIT NF7-S V1.2
1700+ T-Bred B (JIUHB 0310 UPMW) 1.825V
Alpha 8045 / TT Smart Fan 2
2 x 512MB Kingston PC2700 Value RAM @ 421MHz 2-2-2-7

2420.5MHz / 210.5MHz FSB

:Q

So your case is also a place for beer?

 

[Megatomic]

I have a pair of SMD grabbers on the way now. When I get my Vdd mod done I'll update my post above.

 

[silky]

Epox 8DRA+
Athon XP 1700 @ 2530 (11.5 x 220) 1.8 Volts
Kingston HyperX 3500 7 2 2 2

 

[Kung Lau]

Epox 8RDA+ C1 stepping
XP2400+ B
512 Corsair XMS3200C2
10.5x200fsb 46C idle, 52C with prime95
SK-6 and 80mm fan (I value quietness)

2100mhz atm

 

[Sahakiel]

1700+ TBredA @ 1700 MHz
512MB XMS3500C2
A7N8x-Dlx
200MHz FSB

Currently have a 2400+, but it's looking pretty weak. Luck of the draw gave me '02 chip...

 

[Doh!]

1800+ Tbred B @1.65v
MSI K7N2-L
2x256MB original Samsung PC2700 @2-3-3-6
CoolJag 152A

10.5x200


2100+ Tbred B @1.7v
Abit NF7-S
2x256MB original Samsung PC2700 @2-3-3-6
CoolJag 152A

11.5x200

 

[Apotherix]

I am! Or was...

 

[MTDEW]

See sig.

 

[MTDEW]

Silky,

Epox 8DRA+
Athon XP 1700 @ 2530 (11.5 x 220) 1.8 Volts
Kingston HyperX 3500 7 2 2 2

Now thats getting your moneys worth!

Very nice setup.

 

[beatle]

Me, I think...

TbredB 1700+ @ (??x200)
NF7-S v2.0
512 megs twinmos pc3200
SK7/panaflo M1a

I'm not sure at what temp I'm going to settle on as my temps right now are astronomical @ 2ghz, though stable.

 

[NesuD]

2100+ tbred b 0301@10x200=2ghz 1.7 vcore 1:1 fsb/mem ratio.
MSI k7N2-L
GeIL pc3200 dual channel memory kit 2x512meg=1 gig ram running 5-3-3-2 timings.

My week 1 chip has turned out to be somewhat of a dud It can run stable at 2.1 gig but i have to volt it higher and i don't like doing that.

 

[Jeff7]

I'm running 200 RAM/CPU sync; Epox 8RDA+, Tbred 2100+, and this RAM. (Seems the price has gone up $2 since a few days ago.) It's only at CAS 2.5 though; curious thing - the Auto setting in BIOS puts it at CAS 3.0, which makes me wonder if its SPD ID's it as that. I can't read the SPD info directly; the one utility I found that does this is about 2 years old, and Sisoft Sandra mustn't fully support the nForce2 chipset, as it won't display the SPD info in the Mainboard section like it does on slightly older systems.
The other timings aren't too great; think they're 9-4-4 (don't remember all the CAS/RAS/whatevers of which is which right away).
FYI, I was getting some errors at 200FSB with the 8RDA+, so I did the VDD mod to increase the chipset voltage; it's running fine now around 1.79V.