• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

AMD Burton current temp ???

R

RayThunderEarth

Member
Hi all

Yesterday my pal came to me and said that his comp is too hot. He check his cpu temp around 57-59 Celcius. He using AMD Burton 2800 and using cpu fan Volcano 7+.
Is this temp too hot or its suppose to be for burton.

😕
 
Is it stable? If so than it is fine. My Barton 2800+ runs at about 53-55 C under load. Some people claim these temps are "unacceptable" but, as I mentioned, if the PC is stable you won't have any trouble and everything is fine. If you starte getting instability and crashes, then worry.

\Dan
 
Got my Barton 2500+ OCed to 2200MHz and its running 40 idle and around 49 - 52 under full load. Using Alpha 8045 w/ Vantec Stealth fan. My mobo temps are around 30c
 
Well that is certainly high compared to mine 🙂 and it shouldn't be a problem but I personally would find it a problem. I usually don't like my temps up that high. In several apps, it says my new 2500+ Barton is at 94 F while idling...and at 98 F under load. I thought that was incredible so I measured using my own external tools and it truly is at that temp around there.

I just got an Abit NF7-S (Rev 2), Barton 2500+, Arctic Silver Ceramique, Smart Fan II, and the Antec SLK3700AMB with a front 120x120x25mm case fan (rear one is standard) from Thermaltake as well. Oh yea, can't forget about the SLK-800(A)!

I put the Ceramique on a 1600+ that used to idle at 112 F and now idles at 104 F. I'm so glad I bought it! 😀
 
My Athlon 1ghz used to get up to 68c under load thanks to the crappy Neng HSF I had on it (that was supposed to be able to handle up to a 1.4ghz Athlon)....that CPU is still working now....although I did replace the HSF before I sold it on.
 
My barton runs 40c idle 47 Full load @ 3.1ghz

Cheers! Hope that helps you figure out your heatsink\system fans\heating compound sucks monky nuts.
 
Originally posted by: shady06
ardan, whats bios are u using?
Click to expand...

I'm using 17. I just played a few games and the temp is 100.
This is Rev 2.0, as I think I stated.
The room temperature also never ever goes above 72 degrees. It isn't upstairs, where it tends to be much warmer.
 
Originally posted by: Maddscientist
My barton runs 40c idle 47 Full load @ 3.1ghz

Cheers! Hope that helps you figure out your heatsink\system fans\heating compound sucks monky nuts.
Click to expand...
Your claims of running your Barton at 3.1ghz is a bunch of monkey nuts. There is NO WAY you have it running at that speed.
 
yes my pal comp is stable. but this his temp really annoying. I think I must tell him to change his case or place fans on his case. maybe this will work D
 
yes my pal comp is stable. but this his temp really annoying. I think I must tell him to change his case or place fans on his case. maybe this will work D
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top