AMD 64 temeperatures

[mitarbl]

I have AMD64 2800+ Clawhammer and temperatures are between 40c (idle) and 56-7 (full).
I have a box cooler, thats pretty loud, and sometimes runs at 5600 rpm (at least epox 8kda3j is reporting it).
Is this temeprature OK? I dont have CnQ, becouse it have been deleted from bios when i flashed it (?!?)..some epox bug...

 

[Ike0069]

It depends on your ambient temps, but tht doesn't seem that odd.
The .13uM cores (Clawhammer/Newcastle)definitely run hotter than the .09uM cores (Winchester/Venice/SD).
My Newcastle 3800+ runs at 40 idle and 52-54 full load with a Freezer 64 cooler. This with a room temp of about 25-26C (77-80F). The F64 is not the best cooler available, but does cool slightly better than stock.
And while I do have a slight OC, I only saw maybe a 1C increase in load temp from the stock speed.

So in short, your load temp is maybe a little high, but nothing that would concern me. It's also very possible your MB temps are reporting slightly high. You can run several temp programs (Speedfan/MBM5/Epox utility/etc.) and see how the temps compare.

 

[Minotar]

Yeah, Claws run REALLY hot! Mine hits 70C under Prime95, and, from all of my research, that is supposed to be normal for an FX-55 claw. Your temps are nothing to worry about at all.

 

[GamerExpress]

I wouldn't even sweat it dude, those temps are actually pretty good for a Clawhammer, I have seen some up to 75c at full load.