AMAZING OVERCLOCK

[xandy]

my 1700+ tbred @ 2.4

LINK

however temps suck @ about 40*C w/ some cheap thermal grease.

 

[dennisjai215]

what is your FSB & multiplier and vcore at?

 

[xandy]

12x200.5

fsb @ 400

vcore @ 1.85

 

[sodcha0s]

40C does NOT suck. That is plenty cool.

 

[MDE]

That's about what people were getting on 1700+s.

 

[Corporate Thug]

i have a JIXUB thar does 2500 mhz

 

[xandy]

Originally posted by: MDE
That's about what people were getting on 1700+s.

Originally posted by: shady06
i have a JIXUB thar does 2500 mhz

what a way 2 crush my dreams

 

[MDE]

Hey, it's still a fast CPU. It'll trade blows with my 2500+ @ 2.3GHz.
EDIT: Can you get the FSB any higher? Try running at 11.5x210.

 

[pillage2001]

Pants?? What pants?? I could have gotten 2.5Ghz easily but I want to keep the Vcore below 1.7v

 

[Shimmishim]

Originally posted by: pillage2001
Pants?? What pants?? I could have gotten 2.5Ghz easily but I want to keep the Vcore below 1.7v

pansy!!!

j/k j/k

yeah... 2.4 is all right for the tbred 1700+

i had one that did 2.5 as well...

and yes... a 2.3 barton should keep up very well to a 2.4 tbred...

 

[wicktron]

Uhm. Amazing overclock? I think not.
Good overclock though. Congrats. Enjoy your system. Unless you got a Prommy or Vapo LS and you got that 1700 at 3ghz+, it ain't that amazing.

 

[Corporate Thug]

poor guy

i'll bite: its an amazing OC

 

[MegaWorks]

my T-Bred can do 2.4GHZ but it needs 1.85v, but it says 1.802v in CPU-Z. I think thats to high for a T-Bred so I lower the speed to 2.3Ghz check sig

------------------------------------------------------
AMD Athlon XP T-Bred B DLT3C 1700+ @ 2.3GHZ (1.775v) 400FSB = 3200+
Abit NF7-S V.2 (nForce2-U400)
Corsair TwinX XMS 3200LL 512MB @ 2-3-2-6 (2.6v)
Sapphire Radeon 9500 Pro 128MB
Antec TrueBlue 480W
Thermalright SLK-947U with 92mm Vantec Tornado @2800RPM
Antec PlusView 1000AMG
Cambridge SoundWorks MegaWorks THX 550 5.1

 

[Mardeth]

Originally posted by: MDE
Hey, it's still a fast CPU. It'll trade blows with my 2500+ @ 2.3GHz.
EDIT: Can you get the FSB any higher? Try running at 11.5x210.

You have a Barton which doesnt overclock that well, my 2800+ @ 2400Mhz so...

 

[maluckey]

Good job,

That being said, my 2100+ runs solid at 2.47 Ghz @ 1.90volts, 47 C. at full load, air cooled.

 

[Tiamat]

At such a high voltage many of the Tbred B (1.5V stock) can hit 2.4ghz.
I did that for 10 minutes for fun, then lowered it back to 11x200 at 1.675V.
I think I got an additional 10C degrees by increasing voltage from 1.675V to 1.85V.

 

[MDE]

Originally posted by: Mardeth

Originally posted by: MDE
Hey, it's still a fast CPU. It'll trade blows with my 2500+ @ 2.3GHz.
EDIT: Can you get the FSB any higher? Try running at 11.5x210.

You have a Barton which doesnt overclock that well, my 2800+ @ 2400Mhz so...

What's your voltage?