• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Am I screwed?

K

Kennysan

Junior Member
So, I'm using an AMD X2 3800+ processor with an M2N-SLI deluxe mobo, with ocz ram. I plug everything in, and start my system. I don't see anything, and I hear 3 beeps coming from the computer. I shut off the machine and restart it. Same thing. So, I completely unpower the machine, and try switching some of the ram around. This time, however, when I turn the machine back on, nothing happens. The mobo LED won't even turn on, and neither will the case fans attached to the mobo (which did work when I first turned on the machine). Did I just somehow end up frying my mobo? Is there any way to test that it's just the mobo that's affected? I need some help!
 
Oh, haha, I found the problem. I accidentally disconnected the mobo's connection to the PSU. Now, I'm getting one long beep, followed by 2 short ones. The Asus manual doesn't have anything about the beep pattern. Would anyone know where I could find out information about this?
 
Asus has a forum maybe someone there can help you if they had the same problem. Its under the support tab on their website.
 
One long beep followed by two short beeps in your BIOS indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information.

Make sure your GPU is seated properly and if it requires a second power connection make sure it is connected.
 
Ok, so it turns out that I didn't have the video card plugged in to the power supply. Now, however, it makes 1 long beep, followed by 3 short beeps. Is this a memory problem?
 
The memory isn't seated properly. Make sure that it's facing the right way (it only goes in one way), and that BOTH clamps are fully locked in. If you can wiggle the RAM around, then it isn't secure.
 
I checked the ram. It's pretty secure. I also tried swapping out one/both of the memory sticks, same effect. Maybe I should run to bestbuy and get some generic ram and see if that works?
 
Did you cut the power from the system entirely when you moved the RAM around? There's a chance that you ruined the RAM when you did that. Some motherboards come with an LED that tells you when it's not safe to remove the RAM.
 
I think its a memory problem...many m2n boards have issues with ocz ram...go check on ocz support forum, theres alot of guys there with same non-post problem..
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top