- Jan 16, 2002
- 2,335
- 0
- 0
i just got an axp 1500+ mobile off a forum that was a pull from a laptop, and i bought an AK35GTR mobo (kt333) off at forum, so far the computer boots, but i get no video signal, i switched the video card out, and the ram, and those are not the problem, the cpu runs at 1.45V so its not a power issue, my PSU is a 420W psu (came in my raidmax case). i also cleared the cmos.
is the cpu bad, i've had a simmilar problem about 2 summers ago with a palomino 1700+ that died, and the computer would turn on like this, but i'd get no video signal, and i was using a 400W psu at the time.
any comments?
one more thing to add, the board supports 1.45V as a voltage setting, so it should be able to handle the 1500+ shouldn't it?
i've even booted the machine with only the cpu plugged in and teh video card plugged in, no HD of CDrom plugged in, or ram plugged in
i'm not getting any beeps either
is the cpu bad, i've had a simmilar problem about 2 summers ago with a palomino 1700+ that died, and the computer would turn on like this, but i'd get no video signal, and i was using a 400W psu at the time.
any comments?
one more thing to add, the board supports 1.45V as a voltage setting, so it should be able to handle the 1500+ shouldn't it?
i've even booted the machine with only the cpu plugged in and teh video card plugged in, no HD of CDrom plugged in, or ram plugged in
i'm not getting any beeps either