Question Add-in 2.5Gbit adapter

Nov 26, 2005
15,099
312
126
I have an old Intel Gigabit CT adapter nic but I'm looking for a 2.5Gbit adapter that can do 8 Rss queues. Anyone know of any good adapters to do the job?

Thanks
 

VirtualLarry

No Lifer
Aug 25, 2001
56,343
10,046
126
I don't kno about the "8 RSS queues" thing, but you can get discrete 2.5gbit PCI-E NICs, either with the RealTek or Intel chipsets, at Amazon for $25-30. Intel-based 2.5gbe NICs will take more careful searching.
 

mnewsham

Lifer
Oct 2, 2010
14,539
428
136
I have an old Intel Gigabit CT adapter nic but I'm looking for a 2.5Gbit adapter that can do 8 Rss queues. Anyone know of any good adapters to do the job?

Thanks
Pretty sure even the latest intel consumer 2.5Gbps NIC supports at most 4 queues.

I assume you'd need a server NIC for more queues, and probably a lot of CPU cores to feed it.
 
  • Like
Reactions: mxnerd

VirtualLarry

No Lifer
Aug 25, 2001
56,343
10,046
126
Not even sure why 8 RSS queues minimum is a requirement. Remember, OP is also the same guy that needed to edit the registry to make sure that all of his interrupts were "Message Signaled".

Either OP plays at the highest possible frame rate capable on PC hardware, or he has "latency OCD".

Kind of like a "gamer" friend of mine, that swore up and down that his experience was better when he unplugged his router to plug his cable modem directly into his PS3. Maybe, but really, going to go to that hassle every time that you want to play online, and forgoe voice-chat on PC, looking things up, etc.?

Edit: I should add, I'm being a bit overly harsh picking on OP about his "PC OCD". And Message Signalled should be the default interrupt type on modern ACPI systems. (It's mode for the IOAPIC in the CPU, and maybe corresponding in the chipset.)
 
Last edited:

mxnerd

Diamond Member
Jul 6, 2007
6,799
1,101
126

https://cdn.competec.ch/documents2/9/6/2/202262269/202262269.pdf INTEL 2.5Gbe NIC I225-T1 max 4 rss queues

Don't know why OP need so many queues processed by 8 CPUs or 8 cores? Network packets handled by several prcoessors/cores not necessarily will be more efficeint if all you need is a single CPU/core.
 
Last edited:
  • Like
Reactions: VirtualLarry

Tech Junky

Diamond Member
Jan 27, 2022
3,411
1,144
106
ASUS XG-C100C $93

The AQN107 chipset according to the Q&A section supports the 8 queues you're looking for. I use their 5GE 4-port card from QNAP for my server/router and it works well. The above though is a 10GE/5GE/2.5GE/1GE/100MB card so i t would fit the requitement and then some.


Here's a 2.5 from QNAP https://www.amazon.com/QNAP-QXG-2G1T-I225-Single-4-Speed-Network/dp/B08FB83C1H $39
 

unmesh59

Junior Member
Feb 27, 2012
5
0
66
For the Intel i225 based NICs, you need to ensure you are getting the B-stepping which fixed a bug with interpacket gap handling that caused it to not run at full speed when connected to some switches.
 
Nov 26, 2005
15,099
312
126
For the Intel i225 based NICs, you need to ensure you are getting the B-stepping which fixed a bug with interpacket gap handling that caused it to not run at full speed when connected to some switches.

Is there a serial code that would indicate the B-stepping? I have this bookmarked but don't know if it B-stepping.


Just want to say thanks to everyone who posted! I appreciate all the help
 

mnewsham

Lifer
Oct 2, 2010
14,539
428
136
Is there a serial code that would indicate the B-stepping? I have this bookmarked but don't know if it B-stepping.


Just want to say thanks to everyone who posted! I appreciate all the help


From a review on that product page

The QXG-2G1T-I225 cards I received were PCB rev 1.2 and the IC is marked SLNNH, Intel's product code for "I225-LM v3" which is the current B3 stepping
 
  • Like
Reactions: BTRY B 529th FA BN