Abit KA7-100 Cpu Drive strengh

[sundarpn]

the ka7-100 m/b has something called the pull up and pull down strength in the softmenu, with default setting of i think 3 and 2

will changing these be of any use, i am not oer clocking my athlon 650, .18 core.

 

[NuovoTech]

Leave em at default then. These CPU timing settings are best left alone unless you're OC'ng or using a TBird. For the former higher settings give more stability, for the TBird it seems Abit recommends lower settings (0,1)...some have used Auto setting successfully.

 

[Insane3D]

NuovoTech, I am overclocking on my KA7-100, and I am interested what adjusting these settings can accomplish. Is higher more stable, but less performance? I am always tweaking, but I have never found anywhere where these settings are explained. Thanks in advance..

 

[sundarpn]

anyone anythin more on the cpu pull up strength and the cpu drive strength.... in the softmenu of abit ka7

 

[Mickster]

well,
i cant say what they exactly do,
but i can say mine likes to run with them set at o + 0,
respectively with no ill side effects,
menus an programs seem to start a little faster,
then again,could be wishfull thinking on my behalf,

but,it will post a few more fps's in q3 than set to defaults
My two cycles

 

[NuovoTech]

Insane3D - Generally yes, unless you're running a TBird...

>Is higher more stable, but less performance?