Abit K7T-RAID Motherboard $39 at CompGeeks.com

[Evadman]

If the code diapears from the above post, just click on the center pic on the web site ( the one witht he egg ) and the code will then pop up.

 

[kenja]

Deal is still going on. Get the code by clicking on the picture with the egg. There are 200 left. I'd get one, but I already have an extra socket A board.

 

[dongky]

I have this mobo and it's rocksolid for OC'ing.
I have a Duron 700 running @ 913 (by CPUid) @ 100FSB. I used AS and a $5 EKL heatsink and it runs quite cool. I also used a Maxtor Ultra-ATA 100 controller (free AR) since this mobo supports only ATA-66. No reboots, freezes, or BSODs.
In order to do this, i had to Flash the BIOS to r3.
After OC'ing, this mobo becomes picky on your AGP Aperture settings.

I actually bought this mobo for $80 a year ago so it's a hot deal if you're not going to the 2GHz++ zone!

 

[DcHoliday9]

Just got mine. I have this board in my main system right now with a 900Mhz T-bird. It's a great board. I think it's time for another server.

 

[kenja]

Back to GhettoFob's question, which someone also asked in the K7VZM-NL thread: yes, per the thread, new generation Durons will work on a KT133 chipset board. Mmm... 1.0 gigger retail box @ Newegg @ $52... mmm....

 

[AnyMal]

Just ordered mine, $45.00 shipped to KY. Thanks for heads up!

 

[Z80]

I'm in on this deal. Just ordered mine for $45 shipped to Tennessee. I also ordered the following in order to complete the system:

900 Mhz Duron from Newegg w/nifty silver case badge $40 delivered
Enlight 7237 Case w/fan (no PS) from Open Linux $50 delivered

I've got a spare 300w PS, floppy, CD and 2 x 30GB HD's (for Raid). Now all I need is a cheap 15" monitor to complete my ghetto server

Thanks for the hot deal!

 

[theshamu]

Socrilles
How do you get the $39 pricee for 1.1 GHz Duron @TCWO?

Never mind, found the post.

 

[jebbo]

<< I'm in on this deal. Just ordered mine for $45 shipped to Tennessee. I also ordered the following in order to complete the system:

900 Mhz Duron from Newegg w/nifty silver case badge $40 delivered
Enlight 7237 Case w/fan (no PS) from Open Linux $50 delivered

I've got a spare 300w PS, floppy, CD and 2 x 30GB HD's (for Raid). Now all I need is a cheap 15" monitor to complete my ghetto server

Thanks for the hot deal! >>




you are forgetting some very important components:

Random Access Memory and a Video Graphics Array adapter

 

[toejam]

It would appear that this MB may be OOS. I believe it has been removed from the web site. I ordered one at 12:50 PM Eastern time, and have email conformation of my order...I hope it got through in time...

 

[Androck99]

Damn! I left the page minimized this morning because I couldn't decide whether I wanted one and went to class...just got back and it said Out Of Stock!!!

 

[rewap]

Got my order yesterday. Put it in last night. Problem with first boot. CMOS checksum error - defaults loaded. I made a thread about it in the general hardware forum, hopefully somone can help so I don't have to return this.

If anyone cares, the one I got was rev 1.02 with UL BIOS.

 

[docinthebox]

Try clearing the CMOS using the CCMOS1 discharge jumper. Refer to the user's manual for pin settings.

 

[CyberDrgn]

For anyone using a cpu over 1.2ghz you have to flash the bios. After flashing the bios i got my 1333 to run at 1440 with no problems.

 

[newphatdaddy]

I just put this thing together (believe it or not)... It doesn't boot! Power's up, no boot. Checked all connections. Doh! Have a 1035 antec case, heard that might be shorting out the mobo... KT7RAID & Morgan. Anyone try this combo successfully here?

 

[theshamu]

<< I just put this thing together (believe it or not)... It doesn't boot! Power's up, no boot. Checked all connections. Doh! Have a 1035 antec case, heard that might be shorting out the mobo... KT7RAID & Morgan. Anyone try this combo successfully here? >>


You probably have a deead board -- any BIOS beeps? I got a DOA board (they sent me an obvious return as a NEW product :|) first, and after a lot of back and forth talking with CompGeeks, I finally received a refurbished one that does work. I had to pay shipping to send back the first one though.:disgust: It's my last time ordering from them! :disgust:
Anyway, my Duron 1 GHz (came in under 5 days from NewEgg) works well with this board.