Okay, before I was having problems just changing the multiplier in jumperfree mode.. for some odd reason, I can now change multipliers without problem..
The problem I have no... If I set the FSB to 133/33, I cannot use past the 6.5x multiplier. Just no POST. I have tried all voltage settings to no avail.
My RAM is set to 2.65volts, CPU 1.85, everything else is default.
What would cause no POST with 6.5x133, but POST fine at 13x100?
Thunderbird 1.3
A7V266-E
BIOS 1007e
2-512mb OCZ PC2700 ram
Elsa Gladiac Ultra GF2 Ultra 64mb
on a side note: I currently have it running at 1417 (13x109)... why BIOS show 1417, WCPUID and MBM shows 1419, 3dMarks 2001SE shows 1380, and PCMark 2002 show 1380 (or 1390 via online result browser)?
The problem I have no... If I set the FSB to 133/33, I cannot use past the 6.5x multiplier. Just no POST. I have tried all voltage settings to no avail.
My RAM is set to 2.65volts, CPU 1.85, everything else is default.
What would cause no POST with 6.5x133, but POST fine at 13x100?
Thunderbird 1.3
A7V266-E
BIOS 1007e
2-512mb OCZ PC2700 ram
Elsa Gladiac Ultra GF2 Ultra 64mb
on a side note: I currently have it running at 1417 (13x109)... why BIOS show 1417, WCPUID and MBM shows 1419, 3dMarks 2001SE shows 1380, and PCMark 2002 show 1380 (or 1390 via online result browser)?
Facebook
Twitter