A7V133 PCI divider problem

[Davegod75]

I've been trying to get my mobo past 140FSB forever now. I added some hefty cooling to my ICS chip and northbridge and was able to boot into windows @ 148FSB and load up sandra to check some stuff out.

It said my PCI divider was 1/3 and that the PCI bus was running at 49Mhz.
This is mostly likely my problem with stability because isn't that way too high.

Also isn't this mobo supposed to have a 1/4 PCI divider?
Is there something special i have to do to enable it?


Thanks

 

[bshute]

Upgrade to the newest version of Sandra. Versions thru 2000 report the divider incorrectly.

 

[Davegod75]

thought i had 2001. I'll go get the newest though

 

[Biggs]

The newest I believe is the 2001se.

 

[zzzz]

Sandra is wrong. The fsb is set automatically to 1/4 when the fsb is 133 or over.

 

[Davegod75]

ok i guess that's not my problem. My mobo just doesn't like high FSB's....lets see if it likes the 1.33 AYHAJA tbird i ordered for it.

 

[Dulanic]

<< Sandra is wrong. The fsb is set automatically to 1/4 when the fsb is 133 or over. >>



Actually its 121 or higher for the A7V133.