A7V133 overcloking question

[SPAnDAU]

I just setup a A7V133 and Duron800 last night and have run into a problem overclocking it.
If I set the multiplier to 7.5x100 it boots and works okay. If I set it to 7.5x133 I get a beep code that is one long beep followed by two short beeps, then two beeps that sound like "uh ooh". (Really, I'm serious about the uh ohh)

I've tried changing the voltage from 1.5 up to 1.85 and always get the same problem. Any of you know what this error code is telling me?

Thanks

 

[newbiepcuser]

Is the Duron locked or unlock? What kind of cooling are you using? There are more factors in OC'ing your Duron than FSB. You might want to search in the forums how to unlock Duron for overclocking too.

 

[SPAnDAU]

Yes I know there is more to oc'ing a duron than the fsb, it's an 800 that is set to 750, so the unlock has worked. I can always redo the bridging just to see if it's related to that but I'm really just after what the beepcode means.

 

[Dulanic]

Im not sure what that error code... Try a lower multiplier first..... can your CPU handle 1Ghz for sure? Maybe try 7x100 then try 7x133... or even 6x133.... that way at 6x133 we can take the CPU out of the question... since 6x133 is 800Mhz.

 

[Regalk]

That UH OH ususally means the CPU cannot work at that speed without better cooling and more voltage. Try 7 X 133 or 6.5 X 133.

 

[DARRIN]

7.5 X 133 = 997.5MHZ. Might be too fast. Try 7 X 133 = 931MHz.