• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

A7V overclocking - multiplier setting ?

If you are using the dip switches, be sure and use ALL of them. In other words, don't leave the 4 switch block in the default position of off. Move them all to "on". Then set switch 5 and 6 of the six switch block also to "on". Use the first 4 of that block to adjust multiplier.

Russ, NCNE
 
Yeah I dont remember the jumper numbers, but there's one down the mobo (near the panel leds connectors) to put the card in jumper mode.
Then you set FSB, multiplier and voltage from various dipswitches located around the DIMM slots and CPU.
With newer bioses 105x all settings should be available in jumperless setup too. It has been reported though, that OC systems are more stable in jumper mode. Didnt try that yet.

Also, if you have to flash bios, check asusupdate, which allows to flash from within windows. That rocks.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top