• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

-

OK, its up and running! 1600 benchmarks are kinda pathetic tho. temps are funny too...

room temp = 25*C
CPU idle temp = 28*C
CPU max temp = 32*C :Q L O L!

133fsb is next....
 
i really didnt think anyone would care what HD i use :Q
Maxtor DM+ D740X 6L040J2 40gb (ata133/7200rpm/2mb)

-----------------------
133fsb ran on default voltage - big surprise huh?
ill let you all know when this starts to get interesting 😉

140fsb is next...
 
yea zzzz, 1.56v is what i get when i set it to AUTO or 1.5v.
(asus boards usually overvolt) because of this i always post what my vcore is in windows. (actual)
 
Thugs I took it up to 170FSB but it took all of the 1.7v available to do it... temp went up to 60C, so

I'll wait till I get the Alpha to try it again....do you have to do the wire mod to get higher voltage or is

there a hack?
 
galtsfan ~ check your idle voltage from windows. dont use more than 1.75v!
on a p4b533 setting 1.7v usually equals 1.75-1.77v in windows.
 
...150fsb and still on default voltage.

155fsb is next....

this is where it gets interesting folks 😉
my "other" 1.6A (a 3/19/02) can run these benchmarks on default voltage.....
 
Sorry...too lazy to type my own...thanks Thugsrook

SYSTEM
P4 1.6A Costa Rica 06/12/02 SL668 (neweggy)
Asus P4B266-C i845D
ThermalTake Volcano 7+ w/variable fan speed (low:3000rpm@24 dB(A), med:4800rpm@35 dB(A), high:6000rpm@47 dB(A)) currently running @low fan speed
Arctic Silver III
Corsair XMS2700 1x 512mb (set by spd)
Enermax 550W
Dlink 10/100Mbit NIC
GF4 ti4400 29.42 drivers overclocked to 300/666


OVERCLOCK Voltage
2133mhz 133fsb = 1.776v idle, 1.696v load (runs perfectly fine with default 1.500v, i was just too lazy to take out my HS and take out my wire mod)
2240mhz 140fsb = 1.776v idle, 1.696v load (could run in default)
2320mhz 145fsb = 1.776v idle, 1.696v load (could run in default)
2400mhz 150fsb = 1.776v idle, 1.696v load (could run in default)
2480mhz 155fsb = 1.776v idle, 1.696v load (would load in windows under default, didn't do any testing tho)
2560mhz 160fsb = 1.792v idle, 1.712v load
2656mhz 166fsb = 1.888v idle, 1.824v load
2720mhz 170fsb = 1.968v idle, 1.872v load (Prime95 failed)
2560mhz 160fsb, w/ 3:4 Mem DDR426.8 1.776v = 1.776v idle, 1.696v load (jumpered mode)
2560mhz 160fsb, DDR426.8 1.888v = 1.888v idle, 1.808v load (jumpered mode)


3DMark2001SE (build 330) default settings
1600mhz 100fsb = 9428
2133mhz 133fsb = 10892
2240mhz 140fsb = 11244
2320mhz 145fsb = 11172
2400mhz 150fsb = 11442
2480mhz 155fsb = 11622
2560mhz 160fsb = 11934
2656mhz 166fsb = 12166
2720mhz 170fsb = 12374
2560mhz 160fsb, w/ 3:4 Mem DDR426.8 1.776v = failed (still need more tweaking)
2560mhz 160fsb, DDR426.8 1.888v = 12488


PCMark2002 CPU >>> MEM >>> HD
1600mhz 100fsb = 3923 >>> 4252 >>> 1699
2133mhz 133fsb = 5171 >>> 4840 >>> 1732
2240mhz 140fsb = 5451 >>> 5001 >>> 1784
2320mhz 145fsb = 5629 >>> 5113 >>> 1787
2400mhz 150fsb = 5821 >>> 5079 >>> 1754
2480mhz 155fsb = 6009 >>> 5272 >>> 1759
2560mhz 160fsb = 6212 >>> 5551 >>> 1823
2656mhz 166fsb = 6462 >>> 5702 >>> 1763
2720mhz 170fsb = 6575 >>> 5726 >>> 1918
2560mhz 160fsb, w/ 3:4 Mem DDR426.8 1.776v = 6260 >>> 6405 >>> 1828
2560mhz 160fsb, DDR426.8 1.888v = 6257 >>> 6494 >>> 1751


SciSoft Sandra MEM >>> CPU >>> Media
1600mhz 100fsb, 3:4 Mem setting = 2037/2034 >>> 2982/843/1966 >>> 6357/7932
2133mhz 133fsb = 2019/2019 >>> 3959/1115/2595 >>> 8407/10509
2240mhz 140fsb = 2119/2120 >>> 4329/1171/2731 >>> 8834/11031
2320mhz 145fsb = 2167/2167 >>> 4297/1213/2814 >>> 9145/11425
2400mhz 150fsb = 2242/2242 >>> 4700/1254/2911 >>> 9458/11815
2480mhz 155fsb = 2316/2316 >>> 4794/1296/3009 >>> 9771/12218
2560mhz 160fsb = 2395/2394 >>> 4915/1339/3106 >>> 10100/12619
2656mhz 166fsb = 2487/2485 >>> 5075/1388/3224 >>> 10470/13087
2720mhz 170fsb = 2547/2547 >>> 5177/1422/3298 >>> 10718/13403
2560mhz 160fsb, w/ 3:4 Mem DDR426.8 1.776v = 3211/3219 >>> 4934/1338/3118 >>> 10092/12618
2560mhz 160fsb, DDR426.8 1.888v = 3218/3217 >>> 4931/1339/3117 >>> 10092/12597


BIOS SETTINGS
Halt On = No Errors
DDR Voltage = 2.5v
AGP Voltage = 1.5v
AGP/PCI Freqency Setting = turbo1 setting (74/37)
USB Legacy Support = Disabled
SDram Config = By Spd
SDram Idle Timer = Infinite
Graphics Aperture Size = 128mb
Video Memory Cache Mode = UC
Delay Transaction = Disabled
Serial/Parallel Ports = Disabled
PCI Latency Timer = 32
USB Controllers = Disabled
Hardware Monitor = Ignore everything
 
man...I don't want to take out my Volcano again...I am just going to bench everything from 1.700v...taking out that piece of $hit is a pain...and then reapplying AC3...and putting that tiny wire in takes some skills when you don't have perfect vision
 
my 1.6a chip from malaysia says its max cpu speed is 2400 mhz in Asus Probe. Can it go higher. I am runnin a Volcano 7+ wit AS3. thanks for any help.
 
SupermanCK ~ nothing like the old P3 slot1 days eh? ...swap a cpu in less than 30 seconds!

be careful not to rip the cpu out of the socket when removing the heatsink :Q
"twist" it a few times to make sure its free from the cpu - youll see what i mean.

-----------------------
....155fsb and still on default voltage 😀

160fsb is next.....

woohoo! so far so good!
only 1 more hurdle - in order to "beat" my old 1.6A i need to run 160fsb on 1.6v or less :Q
impossible?
 
....160fsb needed only 1.6v to complete the benchmarks 😀

166fsb is next.....

woohoo! this a better chip than my old one so far 🙂 (by .025v)
lets see how she does @ 166.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top