4 failures in Memtest v3.2

[Sean Maxwell]

Stupid me forgot to record the actual failures down, but after letting memtest run overnight, it found 4 errors. Does this indicate my memory is bad?

 

[Hacp]

Try to do some quick runs on test 5/8 as those are the ones where memtest usually fails.

 

[JohnAn2112]

If it's only 4 errors, it could also be CPU or heat related. How much voltage are you giving your memory? Also, try backing down the OC about 5 Mhz and see if that helps.

 

[Sean Maxwell]

v2.85 on the memory, I'll try these suggestions and be back in a few minutes.

 

[Sean Maxwell]

Memory tests 5 and 8 passed, I increased the memory voltage to 2.9v

 

[Sean Maxwell]

The initial problem I was having that made me do the memtest was WMP 10 randomly kept giving me blue screens of death "IRQ NOT LESS OR EQUAL"

any ideas?