3dmark05 score of 3670 high/low?

[lrmat]

i'm sure most of you are tired of these questions but hopefully not so tired you can't answer me.

 

[Appledrop]

last time i ran it i got 4200 (check my sig for specs) tho, the cpu was stock, and i only had 512 ram. ill go run it again and see now hehe, i will report back!

 

[lrmat]

ok i have everything at stock
a64 3400
asus k8n-deluxe
ati x800 pro
thermaltake tsunami w/ ultra x-connect 500w psu
2x512 corsair value 2.5

what am i doing wrong?

 

[Zero Plasma]

Sounds good.

 

[SneakyStuff]

Originally posted by: Smoke0
Sounds good.

 

[Marsumane]

Originally posted by: lrmat
ok i have everything at stock
a64 3400
asus k8n-deluxe
ati x800 pro
thermaltake tsunami w/ ultra x-connect 500w psu
2x512 corsair value 2.5

what am i doing wrong?

he has his card overclocked way higher. you are fine with what u have for the settings u have ur hardware at 🙂

 

[lrmat]

well that's good to know. thanks guys. anand tech forums members pull through.

 

[302efi]

Benchmarking scores mean next to nothing...go play some games and see how it works🙂

 

[VIAN]

It's like an inbetween score.

9800 Pro gets about 2500
6800 Ultra gets about 5000

 

[Rage187]

my 6800nu gets 3600

 

[jiffylube1024]

It's low because you are using drivers before the ATI 8.07 beta (also loosely know as the "Catalyst 4.11 beta") drivers, which fixes the 256MB bug on all AGP X800 cards, PRO and XT.

With the new drivers, you will score around 5000 (probably about 4600 with no overclocking on the X800 Pro and about 5200+ with overclocking the card). Generally speaking, people are getting about 1100 more points with the new beta's in 3dmark05 (strangely enough, 3dmark03 performance is about the same).

I went from a score of 3900 to 5000 by going from the Catalyst 4.10 drivers to the 8.07 betas. This is with my card running at 520/520.

However, I've switched back to the 4.10's simply because I've gotten very used to the Catalyst Control Center and the 8.07 betas only come with the old control panel.

So, if you want to check out what kind of performance you can expect in the future, you can either download the 8.07 betas from somewhere like guru3d or just wait until the official Catalyst 4.11 in a few weeks, which should have the fix.

Best of luck!

 

[jiffylube1024]

Originally posted by: Azzy64
last time i ran it i got 4200 (check my sig for specs) tho, the cpu was stock, and i only had 512 ram. ill go run it again and see now hehe, i will report back!

With the new beta's you'd probably get near 5500 marks with that setup. Give it a shot and hollar back if you're up for it 😉 .