3dMark 2001

[Tecnic2001]

I got a Score of 5670 is this a decent score because i can't really compare it to anybody elses...! Any input would be appreciated.
System
CPU: AMD Athlon XP 1470MHz @ 1477MHz
Motherboard: ASUS A7V266-E
Memory: 512 MB of MICRON PC2100 DDR
Video Card: Visiontek Xtasy 128 MB (GeForce 4 Ti4600)
Hard Drive: MAXTOR 30.0 GB @ 5400 RPMS
Monitor: IBM 19inch G94 MONITOR
CDROM Manufacturer & Model: ACER 56X
CDR/CDRW Manufacturer & Model: ACER 24*10*40

Sound Card: SOUNDBLASTER LIVE 5.1
Internet Provider: COMCAST
Internet Connection Type: Cable

Internet Connection Speed: CABLE MODEM
Operating System: WIN XP HOME EDITION
Other Components: Altec Lansing Speaker System
500wtt Power Supply
Lian Li Rh10 Removable Hard
Drive Unit.
Hewlett Packard 940c
Saitek ST200 Controller
Notes: Mobo Raid Capable.

 

[anthrax]

It you are using 1024 x 768 W/O 32bit W/OFSAA...
than 5600 ish sounds abit low for a GF4 Ti 4600...

 

[John]

You can compare scores here

* BTW your score is very low. You should be in the 8500+ range.

 

[mchammer187]

P4 Northood 1.8A @ 2.4 Ghz (400mhz bus 3x133)
ATI Radeon 8500 @ 295/295
512 MB Corsair PC800
7200 RPM 60 GB Maxtor (not DX series)
SB Audigy

other details look at my rig profile

i get about 9900 @ 1024x768x32 default 3dmark options

 

[jcmkk]

That sounds a lot low if you aren't running with any FSAA on. Even if you are running with some of the lower FSAA settings, then that is still low.

<<edit>> nice system, by the way!

 

[biofobia]

i think he underclocked his system (videocard)
to overclock it, you have to make the mhz numbers go higher (lamemen terms)
and wtf is up with the 7mhz overclock, my granny could do better than that

 

[Tecnic2001]

Probably have to tweak the settings for 3dmark 2001.

 

[Jumpem]

I had the same problem with my Ti4600. Make sure that FSAA is set to "application specific" in the drivers, setting it to "no antialiasing" won't turn it off in 3dmark2001.

 

[BrunoPuntzJones]

Yup, make sure you are running
1024x768x32
double buffer
no aa
Texture compresion on
D3D T&L
24bit Zbuffer

I think those are the defaults which you compare to
Make sure you have vsync off under your vid drivers

See sig for score

 

[CraigRT]

That's a terrible score for a Ti4600. like really low.. if those are default settings anyways...

i ran 1024x768x16 and got 8670 or so on my overclocked XP and GF3 Ti200.

 

[Tecnic2001]

Thanks guys i improved it to 9335. Thanks for the Input........

 

[BrunoPuntzJones]

Good deal, what was wrong exactly? That score sounds about right.