*2* sticks of *double-side *ddr400 memory

[paradise]

Anyone using Athlon64 and operating two sticks of double-sided memory modules with a
200 MHz clock rate (DDR400 alias PC3200) and with no problem at all
(stable)?

Athlon 64 seems cannot using two sticks of double-sided memory in DDR400? no matter s754 or s939..
WTF!!!

so how about 1 stick double-sided memory and 1 stick single-sided memory are working fine?

 

[Budman]

We were very pleased to find that 3 DS DIMMs (1.5GB) of memory worked fine at the same aggressive timings we used for 2 DIMMs. Even though Chaintech does not recommend running 3 double-sided DIMMs in the VNF3-250, we found the 3 DIMMs worked with complete stability. In fact, this is the first Athlon 64 board we have tested that could run three DS DIMMs at 2-2-2 timings. Most Athlon 64 cannot even run 3 DIMMs, though we are seeing a few nF3-250 boards that can handle 3 DIMMs without a problem.

http://www.anandtech.com/mb/showdoc.aspx?i=2063&p=5

 

[BW86]

what he said

 

[paradise]

http://cantona.shyper.com/memory_support_001.gif

hmm.....

 

[orangat]

How do I tell if the memory sticks on newegg (or elsewhere) are single sided? It doesn't say in the description. Also some of the heatspreader ones hides the markings on the modules.

 

[imported_Smithy]

Go to the product link on newegg. The manufacture will tell you the chip specs, or you're buying shatty memory. Shat memory=shat system, keep that in mind.

 

[BlvdKing]

Make sure your command rate is set to 2T. A64's are notoriously picky about memory.

 

[mechBgon]

I have two double-sided Corsair XMS 3200C2 modules doing DDR400 on my K8N-E Deluxe, does that help? Clawhammer 3000+ here.