• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

2.8E C0 stepping

E

eyschoi

Junior Member
I've a 2.8E C0 steppings cooled by Thermaltake Bigwater with 12cm radiator fan. Is it possible to change the BSEL[0:1] to increase the FSB from 800MHz to 1066MHz? In addition, I want to make a vcore mod by inserting u-wire to change the VID[0:5]. What is the highest vcore I can mod? How to achieve this?
Thanks
 
What motherboard and socket? You arent making much sense at all. First of all if you have a S478 there is no 1066 option since the chipset doesnt support it.

And if this is an LGA775 chip how could you possibly do a pin mod?
 
Sounds like it's socket 478. No, there is no way you can change the BSEL to go to 1066mhz FSB, as that is not a supported FSB. I would just use ram dividers if you need to to get the FSB where you want it, assuming the chip can take that anyay. I wouldn't go to high with the voltage anyway, as too much voltage will break down a cpu faster than high temps, so don't think that just because you have great temps due to water cooling, that higher voltage won't kill your cpu.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top