• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

2.53 - P4C800-D vs. P4G8X-D **Compared**

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
Just got another email from FedEx
The first one this morning showed 5/8
but this one shows 5/12

Somebody is about to tick me off.
Calling everybody and their dog in the morning. :|
 
Originally posted by: Thor86
Maybe he's too busy with the new FINAL 1006 bios from Asus. 😀
Click to expand...
Did play with the 1006 final.
Nice to have everything working as it should be without 3rd party stuff. 😉

The chip is in Ft. Worth, TX which is only about three hour drive from here.
It was there this morning and still shows no departure scan for Austin.
Maybe in the morning it will show up. :|

EDIT:
I did go ahead and order some HyperX PC3500 2X256 modules from Googlegear.
Thank you for your testing of the HyperX - Mr. Rook
Also installed the P4G8X-D in my wifes PC so will be testing the 2.6C in it when it comes in.
She only has a 64Mb 9000 Radeon but everything else will be about the same for testing.



 
Originally posted by: jhites
Originally posted by: Thor86
Maybe he's too busy with the new FINAL 1006 bios from Asus. 😀
Click to expand...
Did play with the 1006 final.
Nice to have everything working as it should be without 3rd party stuff. 😉
Click to expand...

Heh, I hear that.

Also installed the P4G8X-D in my wifes PC so will be testing the 2.6C in it when it comes in.
Click to expand...

Woohoo! 😀
 
I did go ahead and order some HyperX PC3500 2X256 modules from Googlegear.
Thank you for your testing of the HyperX - Mr. Rook
Click to expand...
yea sorry i couldnt do indepth super overclocking thread on them but my testing abilities are rather limited on the P4G8X.
i am extreamly happy with my sticks even tho im still running them underclocked @ 358ddr cas22261 2.5v
rolleye.gif


🙂

very interested in the p4c on the p4g8x :Q
remember ~ 200fsb may not work, youll have to try 201fsb due to pci dividers (thx to Mikki for that work)

🙂
 
very interested in the p4c on the p4g8x
remember ~ 200fsb may not work, youll have to try 201fsb due to pci dividers (thx to Mikki for that work)
Click to expand...
Thanks for the reminder.
I may have to go back and read that little short P4m thread.
I know it's around here somewhere. 🙂
 
Now this is the kind of tracking info I was looking for:
P4 2.6C
On FedEx vehicle for delivery/AUSTIN TX 05/09/2003 05:53
Arrived at FedEx sort facility/AUSTIN TX 05/09/2003 05:27
Departed FedEx sort facility/FORT WORTH TX 05/09/2003 01:51
Scanned at FedEx sort facility/FORT WORTH TX 05/08/2003 14:18
Arrived at FedEx sort facility/FORT WORTH TX 05/08/2003 09:25
HyperX PC3500 DDR433
Status: In Transit
Scheduled Delivery: May 12, 2003

😛 - 😀 - 😉
 
Thugs, if you're still reading this thread, which 92mm fan did you use? I installed the MCX4000 today and it did drop the max temp w/ Arctic Silver about 6 degrees, but the 80mm Thermaltake case fan II sounds like a jet engine. 🙂 Fortunately the QFan Control set to fast response time makes it bearable for now. What doesn't help is that the fan isn't all that balanced, so the computer vibrates too on the higher RPMs.

Thanks

P.S. I used a pretty thin amount of Arctic Silver, hopefully not too thin... Less messy though too thin than too much. I could see the CPU slightly, should the CPU be coated so that you can't see it at all?
 
Originally posted by: Krusher
Thugs, if you're still reading this thread, which 92mm fan did you use? I installed the MCX4000 today and it did drop the max temp w/ Arctic Silver about 6 degrees, but the 80mm Thermaltake case fan II sounds like a jet engine. 🙂 Fortunately the QFan Control set to fast response time makes it bearable for now. What doesn't help is that the fan isn't all that balanced, so the computer vibrates too on the higher RPMs.

Thanks

P.S. I used a pretty thin amount of Arctic Silver, hopefully not too thin... Less messy though too thin than too much. I could see the CPU slightly, should the CPU be coated so that you can't see it at all?
Click to expand...
Enable your PM's in your profile and send Thugs a PM.
There is a link to PM's in the upper corner of every post. 😉

 
Thanks jhites, I will do that. In the mean time I just turned down the maximum speed of the fan to prevent the vibration. I'll start a new thread rather than keep borrowing yours. 🙂
 
Originally posted by: Krusher
Thanks jhites, I will do that. In the mean time I just turned down the maximum speed of the fan to prevent the vibration. I'll start a new thread rather than keep borrowing yours. 🙂
Click to expand...
😉

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top