1600 Watt EVGA Platinum SuperNova

[eagle101]

just ordered this will arrive today Friday, I'm wondering should I clear my cmos go to Default
then install new power supply?
Thanks


http://www.newegg.com/Product/Produc...82E16817438037

 

[eagle101]

wow i'm impressed, things are running very very well and smooth voltages are all in range of what's the normal from this site another post or johnnyguru what he says should be in the normal ranges.

I have about 800+ or - watts left over, i'm adding some new high tech 12vdc LED's with a newer controller that just came out for the led's......

Pro TM1809 LED Intelligent Digital Programmable LED, (built in led driver on led strip)

thanks for stopping by

 

[DigDog]

ermm.. you use 800w with 1 cpu and 1 gpu ?

 

[eagle101]

ermm.. you use 800w with 1 cpu and 1 gpu ?

I have other stuff going, and OC running at 5425MHz (219 watt cpu 8core)

 

[DigDog]

aah ok then.

 

[eagle101]

aah ok then.

DigDog

these are the old LED's, the new Led driver and controller board will be powered off the P2 1600 watt psu more lighting effects......just for fun
thanks for the help!

by the way, that's a OCZ Revo3 x2 SSD 240gb "raid zero", under the GPU what do u think the power draw on that baby is?

 

[eagle101]

mistake

 

[eagle101]

 

[eagle101]

no post

 

[philipma1957]

wow i'm impressed, things are running very very well and smooth voltages are all in range of what's the normal from this site another post or johnnyguru what he says should be in the normal ranges.

I have about 800+ or - watts left over, i'm adding some new high tech 12vdc LED's with a newer controller that just came out for the led's......

Pro TM1809 LED Intelligent Digital Programmable LED, (built in led driver on led strip)

thanks for stopping by

Well that is the top of the line as I see it.
I have the 1300 watt g2 from them.

I don't need your psu but I would not mind having it.

 

[eagle101]

Well that is the top of the line as I see it.
I have the 1300 watt g2 from them.

I don't need your psu but I would not mind having it.

philipma,
hey i'm glad you know how good it is! and how nice is a 24 pin connector all 1 harness......!
......did u know they have a Titanium 1600-T2 coming out?

I will stay at P2...
do you have the little fan switch on your psu for the fan to stay on ......or off for auto fan?

I keep mine on.... it runs very quiet and gives some air flow when the psu is on.......I have 2 other fan intake and out take from the psu area only.

how's your 3.3 voltage .......can you do a screen shot of your's from "HWmonitor" like I have above a few posts above, so I can compare voltages....please