• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

15k SCSI w/18gb

$68 for those interested in the price. Big enough to put windows and a couple games on. Good deal if you already have a scsi controller, too bad they are so expensive though.
 
Originally posted by: jndietz
scsi is a bitch to get drivers for

Definitly not true. Both Linux & WIndows have native drivers for LSILogic, QLogic, & Adaptec cards (which are the 3 main brands of scsi adapters). Very easy to get it working with either OS. BTW i prefer LSILogic but thats just my opinion 🙂.
 
Originally posted by: crapito
OP: please put the price in your headline. also, there's another drive with the same specs for $52+s/h on the same site.

anyone: know of any cheap SCSI controllers? 🙂
Thanks for that link for this other drive. Personally, I don't like and don't trust Fujitsu drives. The Maxtor Atlas is a very nice drive for the price. I still use SCSI, and I like these small drives as I use them for the boot drive only with some basic apps. Everything else is then installed on IDE drives. It's a bummer that it's the 80 pin variety.
 
80pin drives were meant to be used in hot swap scsi arrays. Everything all in one connector, power, data, and scsi ID. They made a lot of them for enterprise/corporate stuff so this is probably out of corporate lease from retired servers. So they're just cheaper 🙂
 
Fujitsu MAM's are first generation 15K drives and are quite loud.

For a cheap controller, just go on eBay and search for "Adaptec 29160", you can pick one up for around $20.
 
Originally posted by: ncage
Originally posted by: jndietz
scsi is a bitch to get drivers for

Definitly not true. Both Linux & WIndows have native drivers for LSILogic, QLogic, & Adaptec cards (which are the 3 main brands of scsi adapters). Very easy to get it working with either OS. BTW i prefer LSILogic but thats just my opinion 🙂.

Acutally, both are designed for it😀
 
OMG! I just swapped from my 2x 36gb 10k RPM SCSI 320 HDs to a Raptor 74Gb, now this comes....

Should I drop the Raptor and get 2 of these to put in a Stripped array? would it be faster for games such as WOW? I already have a LSI 320 Controller.
 
I have a Poweredge with 6 10k 18GB drives at the moment. $300 for 15k upgrade sounds like a good deal to me! I might even upgrade the 2 9GB drives holding the OS to these since I only have like 1GB free on those. That would be more of a pain and require partition magic or similar, but still a hot deal for that old file server.
 
As far as raptors go, it's not just about the spindle speed, cache, and transfer rate. SCSI has a queue depth of 16, versus ATA/SATA which has a queue depth of 0. SCSI has far more I/O than ATA. Taht is why the total I/O gets to be significantly faster than ATA, even on older 7200 and 10k SCSI devices.

EH
 
Back
Top