12.41 problems

Demitre

Member
Mar 6, 2001
83
0
0
I am running a win2k machine with the MSI starforce 831, installed the new detonators and when I play games now.. after a while, it freezes up... I am also running winamp at the time and winamp never stops playing.. but game and computer freezes...

this has happened about everytime...

I don't know if its these new detonators or just my card since both are new... I can't restore the old drivers cause I lost the cd already.. and msi's webpage seem to have disappeared... can anyhelp me with getting the old drivers or just with this problem in general?

need more info? just ask me what
 

Compellor

Senior member
Oct 1, 2000
889
0
0
Is DirectX 8 installed?

To uninstall, just go to the Control Panel and select the Add/Remove category and find the drivers to uninstall. Then, install an older set like the 6.50's. You can get them by going here:

R I V A Station
 

Weyoun

Senior member
Aug 7, 2000
700
0
0
I had the same problem with my rig not so long ago with regards to the crashing of the computer, i even had winamp playing :) Anyway, I fixed this by upgrading my 4in1s to version 4.32 and changed my video drivers to 12.41. Also, i don't know if this affected it, but i switched back to AGP2X jsut to be sure. Try switching back to an older version of the detonators, you can find them at M3D Zone

Good luck, i hope this helps :)
 

Demitre

Member
Mar 6, 2001
83
0
0
Nope didn't seem to fix it.. I run an epox 8k7a, so via 4in1 wouldn't affect anything.. but I installed new drivers without agp anyways adn now it seems to crash sooner...

umm bad card? Memory? anything?
 

Compellor

Senior member
Oct 1, 2000
889
0
0
In the BIOS, there should be a setting for the AGP Driving Value. Try setting it to "EA" (default is usually "DA"). What this does is increase the AGP signal strength, and in some cases, will help aid in stability.

Note: Having ACPI installed can also cause crashes with games. Are all devices sharing the same IRQ? If so, disable ACPI and see if that works. Here's a good article on the subject:

http://www.tech-report.com/columns/ryu/1207.x
 

Demitre

Member
Mar 6, 2001
83
0
0
Before I administered these changes, will just reformating and switching to win98SE fix all these problems? I've been complentating going back anyways
 

Compellor

Senior member
Oct 1, 2000
889
0
0
If you go back to Windows 98 SE... in the BIOS, set the "Plug and Play OS" option to "NO." This will override ACPI and set your devices up on seperate IRQ's.
 

Demitre

Member
Mar 6, 2001
83
0
0
Ok goign back to win98 didn't seem to help... This is annoying because why would I spend 150 on a video card if i can't even play games with it... What else could be wrong? should i check the seating of the card?
 

Mem

Lifer
Apr 23, 2000
21,476
13
81
Demitre list your PC specs,then I will try and help,but the 12.41 drivers are fine for me,I`m using Win98 OS1 still,anyway you tried Bios tweaks like disable all video shadowing,disable system bios cacheable.

Try slower ram settings,and is your cooling ok?..Sometimes a quality PSU helps stabilty with Geforce cards.
 

Demitre

Member
Mar 6, 2001
83
0
0
My rig

Athlon 1.2 w/ Taisol cooperbottom hsf
Epox 8k7a
256MB Cosiar PC2400
12x10x32 burner
6x dvd
2x 40 gig 7200 IBM 60gxp
Hpt Raid ide card - pci slot 1
SB live value- sot 6
MSI starforce 831
Netgear fa310- slot 3
Runnign win98se currently, but problem exists in win2k too
Antec 830 /w 5 5200 rpm fans