1055T installed and running

[Dadofamunky]

Gawd, look at those 6 concurrent Prime threads going - what a trip...

 

[richierich1212]

Gawd, look at those 6 concurrent Prime threads going - what a trip...

Yup I actually have to look from top to bottom every so often to make sure there are no memory errors, lol

 

[DrMrLordX]

I already replied in other threads, but I think it applies here.

1090T @ 4127 mhz @ 45c full load with midrange air cooling. And in F@H beats 920 I7@3.7 by 30%. And on a $80 motherboard....

Well done sir.

 

[Dadofamunky]

Yup I actually have to look from top to bottom every so often to make sure there are no memory errors, lol

I'm gonna be checkin' out that mobo, too. Impressed as heck with the results people are seeing with those already. I wonder if I could get away without reinstalling Windows 7 if I did a board swap?

 

[richierich1212]

I've noticed Windows 7 makes hardware component switching very easy, without reinstalling the whole OS. Heck, I had installed Windows 7 on a previous laptop, then pulled the HD when I upgraded it to SSD. The spare 2.5" HD (same Win 7 install for testing) is being used in my file server now, and Windows 7 had no hiccups. It just took a few minutes downloading and installing the new drivers for the hardware change.

 

[nyker96]

@richierich1212, am I reading your sig correctly that you only need about 1,4v to get to about 4ghz!? my x2 620 get just 3,25ghz with 1,4v. This seems quite amazing, considering it's a 6core. I'd imaging you need like 1,5-1,6 to reach 4ghz.

Also, what is your temp like w/ Mugen2 at 100% load?

 

[Moschus]

Nice Thread, nice CPU, but i see one thing that could not be true,

the temprature of your CPU seems to be @ IDLE under 20 C° and fully loaded under 50 C°, this could not be right, not with your Mugen 2 !

 

[richierich1212]

@richierich1212, am I reading your sig correctly that you only need about 1,4v to get to about 4ghz!? my x2 620 get just 3,25ghz with 1,4v. This seems quite amazing, considering it's a 6core. I'd imaging you need like 1,5-1,6 to reach 4ghz.

Also, what is your temp like w/ Mugen2 at 100% load?

Well I'm currently folding right now, 3.9GHz w/ 1.408vcore. Weather.com shows 12c in Vallejo, my room might be about that or a tiny bit higher. It's loading @ 36c - 38c, case open.

 

[richierich1212]

Nice Thread, nice CPU, but i see one thing that could not be true,

the temprature of your CPU seems to be @ IDLE under 20 C° and fully loaded under 50 C°, this could not be right, not with your Mugen 2 !

Mugen 2 is a very good cooler, especially with two Gentle Typhoon 1850rpm fans in push/pull config.