104mhz FSB setting via Dip switches on A7V?

[fluxcapacitorMB]

In the manual for my A7V and on Asus website, I do not see a dip-switch setting to get 104mhz fSB. I have mine at 103 right now, and I get unstable at 105. I'd love to try 104, if anyone knows the settings hit me back. Latez.

 

[Boonesmi]

sorry the a7v fsb wont go up in 1 mhz increments

 

[Boonesmi]

although ive heard that if you have a late revision of the a7v motherboard and use one of the newest bios's you can adjust it in bios the same as on the a7v133 (i dont know if this is accurate or not)

i have an a7v mobo but my board revision was fairly early and it cant be adjusted in bios

 

[Regalk]

Check the Bios man. You hshould have 101, 102, 103 104 105 107 etc etc . You cannot use dips to set these. I had mine at 104 for a long time.

 

[fluxcapacitorMB]

Well, I answered my own question. It works. I leave the multiplyer dip-switch on 10x, and I left the voltage jumpers at 1.85v. I set the FSB dip switches at 100mhz [which is the 'Jumper Free' setting], and then set the JEN [jumper mode/jumper free] jumper to "Jumper Free". It still reads the multiplyer as 10x. And I've got the FSB at 104 so I'm running at 10x104. No BSOD's or reboots yet. And my a7V is rev 1.02, to change the multiplyers in the BIOS you have to have 1.04 or higher.