• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

1 gig RAM + 256 MB = worse?

S

severtki

Member
Just upgraded from 512 MB to 1 gig (2X512), running at dual-channel. I've got an Epox 8RDA3I Pro board, which has one more memory slot available.

With 2 sticks of 256MB lying around, would I be OK putting one in the third slot for 1280MB memory, or will this drop me to single-channel and worse performance?

Documentation stinks and is not real clear about this.
Thanks in advance,
Kirk
 
No you gotta use matched pairs for dual channel. Got to be that same type of memory 2x512 2x1gig etc. You can use another slot but you won't have dual channel capabilities.
 
That's what I figured, but the documentation seemed to imply it would still be dual-channel with the 3rd. Thanks for the confirmation.
 
Thats what most guys do....

Stick it in and see what happens....

yep it usually takes about 30 seconds.....

what are we talking about here......lol
 
Of course that's what I should have done right away, but just blew out a motherboard, so I'm a little extra cautious about doing ANYthing in the case right now.

Added the extra stick and it couldn't handle the faster timings so Windows wasn't stable.

FYI, HOWEVER: boot process reported dual-channel WAS active, so with a faster memory stick, this scenario probably WOULD be fine.
 
On the Epox 8RDA3+ motherboard that I have, adding a third module still means that the motherboard is running in dual channel mode. So, you'll need three matched modules for this to work properly.

DIMM slots 2 and 3 share the same memory bus and DIMM slot 1 is dedicated for second memory channel bus. So, as long as you are using DIMM slot 1, plus either or both DIMM slot 2 and/or 3, you are running dual channel.

 
This is NForce2. That chipset needs to pull those tricks for its 3-DIMM layout to work in dual channel at all - but it doesn't have a performance advantage anyway.

All other chipsets, as well as AMD's CPU integrated RAM controllers, require symmetrical population of the RAM channels.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top