Recent content by toNka64

Doesn't using a divider decrease the performance a little bit? I know it's better to have the extra performance from the CPU at a slight loss in the memory than the other way around (clocking your memory up). But I'd rather have best of both worlds. And isn't that what you get when you keep...

Ok, here's what I got: X2 3800+ Toledo 939 Neo2 Plat OCZ 2x512EL (BH-5) Now, I want to get the CPU to 2.4GHz and use 2x1GB memory. My current memory only gets to 210, I can't give these BH-5s enough voltage on this board to get any higher so my current setup is at a 0% OC ;) So what...

I saw this first at Tom's hardware: http://www.tomshardware.com/motherboard...otherboard_four_graphics_cards-06.html Then this at AnandTech: http://www.anandtech.com/mb/showdoc.aspx?i=2561 Made me do a double take.

If I got the OCZ DDR Booster does it boost two dimms? I keep my memory in dimms 1 and 2. Do I just put the booster in dimm 3 or 4 and it will boost both or only 1 dimm? I have no experience with that product so...

Yeah, I saw the pics at Zalman.com. But I want to see pics of it mounted on a mobo. So when you do it take pics and post em.

neo2 sucks really bad at giving accurate temps. your temps are probable beeing read 5 ~ 10 C over what it actually is

boatillo you have any pics of your Zalman CNPS7000B-AlCu (Blue LED version)?

I have the zalman nb cooler on mine. My gfxcard is modest in size though so it isnt a problem. but its definately close Look Here And Here if you have an nvidia anything, forget about it!

d00d that 120 is intended to be at 5v you are suposed to plug it into the fan only (5v) molex coming from the PSU It was never intended to be ran at 12v I believe the manual tells you that. I keep all my fans on my zalman fan controller. So i can adjust them to what im doing (idle@night...

If you have this HSF on this mobo does it block dimms 1&2 in any way. I mean, even if it fits, would you have to remove the cooler to get a module out? Does anyone have pics of the Zalman 7000 on a K8N Neo2 with memory in dimm 1?

Wow! This happened to me too a couple times with my A64 ans Silent Boost. I didnt break any pins though... I used cyramic though. I thought it was just my motherboard socket sucked. It would do it everytime too. I tried sliding and slowly lift at the same time. Didnt work. Its like there...

"The fan on the Silent Boost is supposed to be based on a Panaflow M1A which Panaflow rates at 28 dBa, not 21." well... take this into consideration, the panaflow has a full frame, the Tt does not. That open design helps airflow to decrease sound. Now a difference of 7dBa, i dont know...

Duvie You hopped on the s939 boat! Congrats! >Whats your specs, timings, ratios, ect?

...or flux capacitor. :)

Well, call me anal but I'd rather it was a flat MHz. I dont like my mobo giving me a "little OC" without my permision. If I want to OC I will do it. Makes me think about how I had all kinds of stability issues with my mobo... Then I read to put the AGP freq. to 67. So I did it and have had...