Recent content by TheDisturbance

  1. T

    Samsung optical units.

    i have a samsung 48x16x48x drive and it works perfectly...it doesn't have mt. rainer which i won't use ever probably...i don't really think it matters between a liteon drive or a samsung or anything else for that matter...it's just a cdrw drive...i have a liteon dvd drive and it works fine...i...
  2. T

    P4 2.4 ghz chip showing 1.61 Ghz...

    someone needs a new board...IT IS ONLY A 533MHZ BOARD! http://www.gigabyte.co.jp/products/8pe800pro_spec.htm
  3. T

    Do I Need To Change Any BIOS Settings?

    well, i put the DRAM H/W Strap to Low and the DRAM Ratio to 3:4 and i couldn't boot into windows...it kept BSODing and restarting...when I changed it back, it worked....is this a voltage problem?
  4. T

    Looking for a high end 19" or good 21" monitor, recommendations?

    I have the Sony 19" E440/B Black monitor....I love this thing....its huge going from this to a 17in. plus its black :)
  5. T

    Do I Need To Change Any BIOS Settings?

    Here is the basics of my system. P4 2.53GHz @ 2.87GHz ABit IT7-MAX2 v2 (love this thing!!!) 512MB Corsair PC3500 DDR PNY 64MB GeForce4 Ti4200 @ minor O/C of 259/544 Here are the BIOS settings: CPU VCore set to 1.5----is 1.47V FSB/AGP/PCI- 151/66/33 PCI Bus- 33MHz (fixed) Multiplier- x19 DRAM...
  6. T

    HELP!!!!!!!!!!!!! TOO HOT!!!!!!!!!

    Well i just put the slk-900u in the p4 system and it wouldn't make contact with the processor whenever i tried...i turned the pc on and got into the bios and saw that the temp was 80C!!! i immediatly shut off the pc but am still wondering why it wouldn't make contact...what do i do now? remove...
  7. T

    How do I OC my PNY Ti4200? 7777

    download RivaTuner....i have the 64MB version but I don't OC much...i need better fans in the case...
  8. T

    IDE Raided Drives

    i have a highpoint 374 onboard controller and 2 WD 80gb 8mb cache drives on raid 0 and i have had absolutely NO problems yet...knock on wood
  9. T

    Vantec Tornado on Vantec Neuxs Fan Controller

    Is it possible to put a Vantec Tornado on a Vantec Nexus Fan Controller with this adapter? http://www.trianglecables.com/4pinpowto3pi.html then i can use this extender to extend the cable? http://heatsinkfactory.com/cgi-bin/...atalogno=WI-003 btw, i already used all of the 4 pin to 3 pin...
  10. T

    How Low Can The Tornado Go?

    anyone else?
  11. T

    How Low Can The Tornado Go?

    i have it too...i have the nexus multi and the fan controller...what is the loudest fan you have on there? also, can you use Thermaltake Smart Fan 2 on them?