Recent content by SonDa5

Your BIOS was stable at default speeds but didn't over clock as well as my BIOS. My BIOS can be found in this thread if you want to try it out. http://www.overclock.net/t/1281711/hd7950-revised-with-reference-hd7970-pcb-club#post_17724563

Thanks again. Link worked and have flashed my Sapphire 950mhz Edition to your Vapor X Edition. http://www.techpowerup.com/gpuz/w3csu/ Going to start to over clock to see how stable the BIOS is with my card.

Thanks for the BIOS and too bad about the photos. I'd love to see what the PCB of it looks like. Here are photos of my Sapphire HD7950 950mhz edition which uses a reference HD7970 PCB and is compatible with reference HD7970 aftermarket heatsinks and water blocks.

No Liquid Pro results? Supposed a be 2-3c lower than CL Liquid ultra. CL Liquid Pro is so thin that when applied properly that you need to have as perfect as possible contact coverage between DIE and block for it to work right. I used contact paper pressure test before doing bare die mount to...

New here. Thanks alot IDC. This thread helped me alot in my delidding experiments with a 3570k. Seems clear to me that delidding IB helps lower temps and thermal dissipation performance when proper mount and effective TIM are used. I am running a bare die mount with DT Sniper...

Can you take the heat sink off and post photos of PCB? I have seen or read of 4 different versions of the Vapor X HD7950. Some photos of PCB will help to determine all the differences of your card. I'm thinking of getting one if it is built on reference HD7970 PCB. Could you please get your...