Recent content by ShyGuy69

I have the gigabyte x58a-ud3r and i know exactly what your talking about my motherboard makes that funny noise too.. i dont know if it HT thats causing it but its annoying lol

im currently at 3.8ghz running prime which is at 76c so i think there might be a problem

I just have it at 3.8ghz but with ht off but also still getting the bsod :P i guess my chip is pretty shitty :@

welp i try to put the vcore at 1.42v and see how it goes 1.45v the temps are kinda high for my liking.

right now i have HT on with 1.45v I had it 1.4v but i got a BSOD using prime :P but this seem to be alot of Voltage for a 3.8ghz oc i seen ppl use less but i dunno i'll see if this is stable but temp is a issue its at the 80's

i got a bsod 101 which means vcore so i uped it to 1.45v would this be safe?

yeah lol i try to do another bench with it off :P currently have mine clock to 3.8ghz so far stable

it really depends on the batch you get i guess ;P I finally got mine stable at 3.8ghz with decent but not good enough temperatures. And I dont like the vcore voltage much at 1.4v but this is how it is stable so i guess i have to live with it :P

bclk: 200 <multiplier: 19x qpi link speed: x36 dram: 6x 1200mhz unclk: 13x timing: 9-9-9-24 1T vcore: 1.4v qpi/vtt: 1.4v dram: 1.66v qpi pll: 1.2v so far stable for 3hr in prime95 blend test with temp at 78c

yes i did :P i only found out after that i suppose to turn it off

i cant find the cpu vtt all i have is qpi vtt and qpi/vtt I left the qpi/vtt auto well i looked at your setting on ur sig and i see if i can do it with your setting it boot but i dunno haha i only change the qpi vtt to 1.2v and vcore to 1.31875 and dram to 1.66v My overvoltage led is...

what is the diff with the cpu vtt and qpi vtt i dunno if i have that setting in my bios?

bclk: 190 multiplier: 20x qpi link speed: x36 dram: 6x 1140mhz unclk: 13x timing: 8-8-8-24 1T vcore: auto qpi/vtt: auto dram: auto I get the bsod on prime95 i'm not sure which BSOD :P

I had the V2 but unfortunately i screwed up one of my ram slots. I replaced it with a Gigabyte EX58 Extreme but i cant seem to get a stable overclock at 3.8ghz like i had on my v2 sigh :(

I currently own i7 920 with a gigabyte ex58 extreme mobo and 6gb corsair dominators triple channel kit. I have it at 3.8ghz but I cant seem to get it stable. Anybody can give me a few advices?