Recent content by Robohl

Asus ftp

No probs mate, sorry to hear its a bad stick, I hate RMA's Yeah Vista is a hog, thats why I dual boot XP64 and Vista64 :)

sorry then i dont think there much you can do, besides using the motherboards raid functions. the board does have 0, 1, 0+1, 5, jbod. a bit limited compared to your raid caid card :) or maybe another raid card instead. sorry I cant help.

Oh well looks like your out of luck. will the raid card fit in a 1x pci-e slot?

hi m3jsh1, So I take it the raid card is a 4x pci-e and it is in the 2nd 16x pci-e slots, if that is the case you would have to flip the ez selector card for to enable the 2nd slot.....But your video card in the first slot would drop to 8x and not 16x like it should be. Thats if it works...

hi Daz Yeah try 2.17v and 4-4-4-15 2T or what it say's on the sticker on the modules? Make sure you set the command rate to 2T as this can be a major issuse! Good luck

It sounds like a faulty module....But to rule it out, boot the comp with the good module and go to bios and set the ram voltage and timings manually, shut down, install other module. Make sure they are in both black or both yellow slots. sometimes one module might need slightly more voltage...

AMelbye Stab in the dark here, have you tried different NB voltages including auto ? And with your Corsair memory more voltage might not equate to higher Mhz depending on which IC are used. Hopefully someone here might have some other idea's for you.

Mate, great sticks alright. I just tried the power off theory and I still can't get higher than 1333FSB :( Just tried my Ram as well, managed 950Mhz @ 4-4-4-12 2.179v or 1100Mhz @ 5-5-5-18 2.179v but according to my everest scores 800Mhz is still better for me. oh well it was worth a try

Good job to get the Ram to run at 1000Mhz, did you have to relax the timings to 5-5-5-18 ? Must be micron d9 or similar chips. Thats interesting with the power cycling, hopefully that might help me :)

Sorry, 16 is TRC. but if you've got it going you probably don't need to change it. If you get a error in orthos just bump the cpu voltage up another notch. Yeah this board is so quirky, I have tried everything possible to get above 3Ghz with both my old E4300 and my Quad but it's not...

Hi dac2u have you tried higher Cpu voltage? Have you disabled all the things you don't need in bios? try 1333 fsb unlinked 800 mem, cpu 1.3625V, NB auto and leave your ram at 2.17v 4-4-4-12-16 2T you might need to use up to 1.45v for the cpu, my old E4300 needed 1.45v @ 3000Mhz...

Yes the 0608 is better than 0703 for OC'ing as 0703 has major problems but I'm not sure if 0608 supports E6750 fully. If you check out Asus website and cpu support page it should tell you which bios has the required micro code update to run your CPU. Ok, I just checked and you can use 0608...

I believe that if you have a new 1333Mhz Cpu or Vista hibernation problem or 4Gb Ram, the newer Bios might help. But just like you I think it's a joke when such a International company cant get things right and are just worried about the newest mobo out. I do understand business ethic's in...

Thanks, I totally forgot about bootable CD even though I just went from 0608 back to 0401 last week by CD :)