Recent content by Ocmersh

In case anyone cares, or has a similar problems in the future: It was the intel iGPU. It was pulling maximum power regardless of load. The thing that fixed it was a clean driver install. I don't know how it happened however.

Thats what I was thinking it might be. There are two updates from microsoft in the last 2 months, and I tried uninstalling them without success.

It has the 65whr. Yes it is I monitor the wattage and make sure it is using the igpu only on battery, making sure the dedicated gpu is disabled. I checked the C states for the processor and they look good. Weirdly, I removed throttlestop and deleted its INI file. Boom, cpu package power drops...

Thanks for the reply. I have done those scan with webroot and they've returned nothing. Speedshift is enabled (Processor does indeed shift down to 800 mhz on power saver), however power usage remains high. The only thing I can think off that may be causing is is processor C states, though i've...

I think the issue might be a windows issue, as this only started happening recently. I apologize if its in the wrong section: The issue: MSI GE75-9SG Laptop, Win10 PRO Until about a month ago I would get 4 - 5 hours of battery life, Now I get less than an hour. CPU is 0-1% usage at idle CPU...

So I started putting together a new system a few weeks ago, I was having stability issues from the get-go. Sometimes the system would reboot while in BIOS or the screen would flash whilst using displayport (but not on DVI) before I get into the OS, but never while in the OS. After doing several...

So here is an update: Well I tried my old card by itself, it ran fine, I ran firestrike with no issues and finished with a 16000 score. I swapped it out for the other card and it simply flashes at the login screen I have no response. Rebooted, now I have CCC yelling at me telling me there is a...

Also if even if it was the PSU wouldn't it be able to at least boot? I mean under idle it shouldn't be that intensive.

Before I wiped my old harddisk I ran furmark on the system and it did fine. It is only after I wiped everything that I have been having problem. I even ran firestrike extreme

Ive tried running with just one or the other card active by shutting off the PCI-E lanes, there are switches on my MOBO to shut them off and I have the same issues. Would doing it physically make a difference?

So I have just barely put this system together, and after I am done installing the all the other updates/drivers/bios/everything I go to install drivers for my display devices and the system crashes and goes into a reboot loop when it attempts to do so. I have to boot into safe mode remove said...

..