Recent content by LCD

Update: Check out my webpage with a new Wcpu Screenshot However, I can't seem to get above 198 FSB....temps get into near the 60C at full load and I can't boot into Windows Properly. I think the ABit mobo is stopping me from doing this. But anways...3.56 GHz is really nice and I'm getting...

Whoa...about 250MHz higher than mine....time to bump it up some more.

Hmm..I don't how to try Prime95....would a several hours of Sandra Burn work as a test for stability? Anways...I have been playing Unreal Tournament 2003 for a couple of hours now...the thing seems stable, and so is the temps. BTW..what is SETI?

I get around 1.65 at idle and down to 1.61 and sometimes dips into the 1.5 territory at full load. I have a hunch that my cheap powersupply isn't giving enough juice.

Once again... I have a 1.8A C1 stepping PIV overclocked to 3.45GHz. My configuration is: Swiftech MCX 4000 with ThermalTake Smart Fan 2 ABIT SR7-8X Mobo with Geil DDR 433Mhz Ram Ratio is at 1:1

I think I could push higher since the temps are good, However, my Abit mobo won't let me go over 1.7vCore. Perhaps I should get a new powersupply and maybe do the wire trick? Duvie: I was considering the GB route..however I was hoping I could wait til the Spingdale chipsets.

Ok Duvie, I posted my results in your thread. It includes the mobo I used, the online vendor I bought from, and my setup.

Well, Duvie told me to post it here..so here goes I have a 1.8A C1 stepping overclocked to 3.45GHz @ 1.7vCore in Bios, and between 1.61-1.69 vCore in reality. I got my 1.8A a month ago, before I realized it was a C1. I purchased it at MemoryMedia I purchased the retail box...not expecting a C1...

I can't exactly remember...but I think it was a SL6LA. I know it is a C1 defintely because on the bios screen, the default voltage is 1.525V. PeeLucky, like I said above, I am using a Swiftech MCX -4000 with a TT Smart Fan 2. The core voltages on the bios screen is 1.7, but it varies between...

Blurry, I used a Swiftech MCX 4000 with a ThermalTake SMart Fan 2 as my cooling setup. Surprisinly, I didn't need to bump up the voltage that much. On my bios, it says 1.7 but in reality it is floating around 1.61-1.68 Cpu temps are around 37c Idle and 46c at full load.

Check out my Page Sorry for the bad picture...apparently the jpeg crapped up when I tried to enlarge it.

One for Vantec because that's the one I want to get.

I want to overclock my P4 1.8A more than 2.4GHz, but I realized that the stock cooler isn't cutting it anymore. I have three choices...Vantec Aeroflow TMD cooler, Taisol Heat Pipe, or the Thermal Take AX 478. Which is better? Thanks

I hoping to purchase a new motherboard by Christmas. This is my only chance to upgrade from my i845G chipset based motherboard. I was wondering which is better, Granite Bay or the new Sis Chipset? I've heard that the SiS chipset has Dual DDR, etc, but I don't know when it'll be announced...

I think we all have our doubts. I read from the forums that the guys who were able to get HT enabled had Engineering Sample Chips, so I think the pin trick won't work. On the other hand, if the pin mod does work....there will be a lot of celebration.