Recent content by JonDoms

Man that is crazy! I'm still on 0202. I'll OC some more after a few more months when I feel things are just not snappy enough anymore. hahaha. It's hard to keep up with this thread AND I check in about once a day. Everyday I have 2-5 pages of posts to read through. Will chime in...

Love the release notes with the 0401 bios: 1.Reduce S3 resuming time. 2.Change CopyRight year from 2006 to 2007. Hahahaha Wonder what happened between 0202 and 0401? Core2 you said you got your system up to 3.7? Is it stable with Orthos or Prime for more than an hour? 4 hours...

ZIP ZOOM FLY has them for a few bucks cheaper than the e6300. Better off going with a e6400.

Yea I would definitley check what CPU-Z says it's running and then compare it to what CPU-Z says the SPD timings are. Then go back and manually configure them to run at 4-4-4-12-1T or 2T @ 2.1v. These suckers need a lot of power to run at 800mhz manually. I didn't run them on Auto.

Ahh forgot to add that. WD 500KS and 250KS. I also have a 750GB Seagate but it's in another rig. Airflow is key.

I have been using this board for how long now Core2? I have ZERO issues once I figured out what I needed to get my system stable @3.6. 1st I don't run @ 3.6 all the time. Only when I want to run benchies and what not. I have gamed on it and watched live HDTV on it for hours on end at 3.6 and...

Hey HRPretzel. Here's a link to my final settings where I was able to prove 4 hours stable on Orthos. https://www.mowersclan.com/forum/viewtopic.php?t=3711 Again not all CPUs posses the same OC capability. If you can get the week code we can narrow your particular CPU to OC abilities...

What voltage are you running your memory at idiotekniQues? What are your voltage settings for everything.

I got 14s for 1M SuperPi with both Cores running 1 Application of Super Pi. When I run 2 Applications and set Affinity to each I get 18s. And improvement over the orgininal times of 16s and 19s respectively. My settings: 6600 (9 multi) x 1600FSB. vCore @ 1.4 +100mv in Bios. NB @ ~1.5 in...

I don't think we need to relax timings as long as you are running your memory at the timings and speeds and voltages it is recommended. This is from my experience with OCing my C2D setup. I can run fine with my 6600 @ 3.6ghz with a 1600mhz FSB and a 800mhz memory bus with my PC-6400 rated...

Yea I live with roommates now and a GF who all share the cable connection. I have zero problems playing games while they are on youtube and surfing the web. Plus when I had a miniLAN a lot of peeps would torrent and I still have no problems because the router prioritizes games over everything...

Yes I have the DLINK Gaming router and when I had DSL it was fantastic. I had a 10 person LAN and even with torrents on our gaming was not disrupted. (BF2 all connected to the same server). Now I have cable and although it prioritizes my packets going out, once it hits the cable side I see a...

The KillerNic is garbage! $250 for a NIC!!! comeon. I paid $100 for a 3COM NIC when NICS where really expensive 10 years ago. Nothing this NIC will do for you if you have a crappy Internet service or Cable Internet. The NIC doesn't reprioritize your packets over other people's when the...

L33T on ClockGen! L33T on being 15 min Orthos stable! So after upping my volts to 1.42 in bios and reads 1.36 in Speedfan and CPU-Z under load. Not under load Speedfan reads 1.46 and CPU-Z reads 1.175. Temps are outrageous. CPU-0 & CPU-1 reads 66C and Temp 1 as 53C under load. Not under...

Yea my memory is in the black slots. I have the memory set to 2.2 and it also reads 2.2v Beta Speedfan I believe or else my system would be giving me fits. My TJ07 provides lots of air flow. I can put my blower right over the NB and SB area witht he case open and still can't pass Orthos. And...