Recent content by inverse

I have Intel INF 8.3.1.1011 chipset drivers installed. Is this normal? I thought all USB ports on my Mobo were USB2? Pic

Oh sorry I thoguht you meant copying files was slow. I've had a similar experience where after OCing, everything would load slower than stock. A BIOS reset fixed it also :)

You have Vista don't you?

Ah graysky, I've studied your guide before OCing. Best OCing guide I've read :D As for lapping, don't think I'd ever have the guts to do that :(

E8400 @ 4005 445 FSB Prime95 tested 12 hours stable voltages: CPU - 1.35 in bios 1.31 in CPU-Z 1.28 to 1.3 under load NB - +.01 FSB - +.01 DDR - 1.86 (should be 1.9 is there vdroop for ram also?) Temps: Idle: Core 1: 43 Core 2: 38 Load: Core 1: 65 Core 2: 60 It spikes as...

I'm overclocking and I couldn't find the option to lock my PCI bus anywhere. I only see the PCIE Lock. Does this mobo automatically lock the PCI? Should I be worried?

still having this problem :(

Just an update: I raised the vcore to 1.3 in BIOS and its reading 1.25 in CPU-Z and bumped the FSB to 423 so I'm at 3.8ghz now. Been running prime for the past 4 hours and it has not errored yet. Currently at 61-64c 100% cpu load as reported by HWMonitor. Anyone have the answers to my...

I guess I should have rechecked my setting before posting :o. But yea its like 1. soemthing and is showing up as 1.2v in CPU-Z. I'm still erroring in prime95 at 1.2v though :(

I couldn't find the PCI bus lock in the BIOS. Is it automatically set to 33 always? I found the PCI Express and set it to 100Mhz. I've set the CPU voltage to 2.0 or so in the bios but its only coming up as 1.2v in CPU-z. CPU-Z is the correct reading right? After OCing to 3600, I booted...

To answer the OP question yea it was a pain to install. I ripped off a good portion of my skin screwing in the thumb screws as tight as possible...

YES!! This was the worse part of building my new rig. I literally spent 1 hour trying to connect the 4-pin the mobo. And I'm using a Tuniq Tower and P182 case so theres fans above and to the left of the massive HS. There was about a 1CM clearance to get my hand between the HS and the fans...

Yea thats what I mean. The XP machines can see any folder I choose to share.

No go. The XP machines can't connect to the printer. The printer is set on share on but can't be seen. In the printer properties under the share tab it says I have to install additional drivers for other windows to recognize due to the fact that I am running 64bit and the XP machines are...

Had this problem on an XP machine. Turned out to be the Nvidia control panel context menu for me.