Recent content by influenza

Click the ram in slot 1 and 3 on this board and it will be in dual channel mode

I reflashed the bios and can reach the mem timings now :). What timings are advised when I want to run this CPU at 12,5x200? now it's 3-3-3-11 iirc.

The voltage is set at 2.7 atm. I can't set it manually. Everytime I select it the option just jumps back to optimal :confused:

I can't look atm, but those times are pretty much what I remember when setting it to by spd. Can't set them manually anyway. if I select manually then it's just changed back to optimal. Resulting in 200 Mhz. So now I've set it to 83% resulting in the 166 Mhz for the memory.

Gis sig says 2500 and the topic 2600, maybe that's what causing the confusion? On my board the multiplier for this processor cannot be higher then 12,5. So that could be the cause of the problem in this case too. Try 12,5 X133.

Gis sig says 2500 and the topic 2600, maybe that's what causing the confusion? On my board the multiplier for this processor cannot be higher then 12,5. So that could be the cause of the problem in this case too. Try 12,5 X133.

Hmm Interesting. The board shipped with rev 1009. I updgraded through asuslive and this revision was still on the .tw ftp. I could downgrade if this bios is really bad. Atm I can't get it stable at 200 fsb. At 166 fsb everything is ok. Unfortunately the multiplier can only be 12,5 giving a max...

Hmm. Well tried the 11X166 and it's a no go. After saving saving the system shuts down. The only thing that seems to be working is 6X133. I tried this on two different mobos with different memory and results are the same. On the other mobo the processor is also recognised as a 800 mhz amd...

Ok I believe I tried 11X166, but I'm gonna try one more time to be sure. The default setting is 14X133 so if 12,5 is the highest multiplier that would explain the 6X133. The heatsink is properly attached and working (temps somewhere in the 40 C) The memory is pc3200 (kingston) and should be...

I recently bought a new Mobo, new RAM and new CPU: Mobo: Asus A7N8X-E deluxe bios rev 1010 Ram: Kingston 1024 MB Pc3200 (KVR400X64C3AK2) CPU: AMD XP-M 2600+ Problem is that I can't get the CPU to run at any decent speed. If I let the bios to be default the processor get's recognised as a...

Could you please Explain me what settings you're using (preferably all bios settings if this is not too much trouble). I have this Asus A7N8X-E deluxe Amd Xp-M 2600+ Kingston Ram 1 GB pc3200 SHarkoon heatsink I can't get this cpu to run. It defaults to 800 Mhz (6x133). All other settings make...