Recent content by Darkranger

  1. D

    Help - need alternative to IT7 Max

    Thanks for the tips... i will try suggestions with the fan connections, i do have some standard 2500rpm coolermasters nocking around which i can try, also will try just a couple to start with. My V2 is the Black PCB... is there any difference???
  2. D

    Help - need alternative to IT7 Max

    I see both of you are using the ABIT IT7 Max2 V2 and obviously have had a good experience with this board. Do you think I am giving up on it too easily??? The reason I went for the MAX in the first place was because I have had several Abit boards in the past with no problems at all and I...
  3. D

    Help - need alternative to IT7 Max

    I am using 5 x Enermax 80mm variable speed fans > 1000rpm - 3000rpm. Tried them all at different speeds on the suspect header but to no avail.... I don't think the BIOS problem is a cold boot issue - the system posts OK, no O/C at this point but hitting DEL just give's me the black screen and...
  4. D

    Help - need alternative to IT7 Max

    Yep - I tried the latest Bios and a moded one from sudhian which includes the latest HTP 3.01 Bios - but still no good. You must be lucky with that fan header - this is the second MAX board I have had with this problem and both of them locked up in the BIOS and also crashed the OS when using an...
  5. D

    Help - need alternative to IT7 Max

    I have 3 probs whith this latest board - 1 of the fan headers seems to incorrectly report the attached fan rpm (8594rpm) and casues the BIOS to lock up when ever you enter the 'Health Status' screen. 2 it takes usually 2-3 boot attempts just to enter the BIOS in the first place (get a black...
  6. D

    Help - need alternative to IT7 Max

    I'm in need of an alternative to the Abit IT7 Max2 v2. I have had no end of problems with Abit motherboards and have finally given up with them completely. I have now had no less than 4 Abit Max series boards and none of them have worked 100% :disgust: My set up: 1 x P4 2.53B Nothwood 1 x...
  7. D

    HELP PLEASE - Minimum PSU requirement ?

    THX to everyone for the replies, the info has been most helpful, I knew you guys would know this stuff. :) Looks like it will be a new case with a decent PSU though.... probably not worth the hassle or cost of just upgrading the PSU. THX again... Neil.
  8. D

    HELP PLEASE - Minimum PSU requirement ?

    This upgrade was for a third system, so not interested in any other cases thx... Just a spare mATX case that I thought I could put to good use. Looks like it will need a PSU upgrade but not sure if it's worth the cost??? could probably buy new case with adequate psu for same price... as for...
  9. D

    HELP PLEASE - Minimum PSU requirement ?

    Thx for all the replies... I had a feeling the PSU was not up to it
  10. D

    HELP PLEASE - Minimum PSU requirement ?

    Does any of you helpful ppl know what the minimum PSU req is for the P4 cpu's. To be more precise, I have a Micro ATX case with an older 145watt sparkle PSU (no P4 power connector) and would like to set this up with :- P4 Celeron 1.7Ghz Abit BG-71 mATX Mobo Will this work ??? Thx in advance...
  11. D

    Newegg 1.6a pricing?

    Forgot to mention about the pricing - Supply and Demand Short Supply + High Demand = Higher Price commodity Unfair ? but seems generally excepted... ppl will pay the price
  12. D

    Newegg 1.6a pricing?

    From what i've read and seen ppl achieving on this forum the 1.6A is more overclockable or easier to overclock and reach a higher percentage increase over stock than a 1.8A. This is most likely due to the multiplier of only 16x as opposed to 18x as well as other factors. If you look around on...
  13. D

    Need some advice please...

    Looks like a good deal on the RAM, from what i've heard Mushkin is very good quality and highly overclocking friendly... For the fans (also a very good deal) i'd go for the 3 pin. In the past i've used coolermaster fans and they came with 3pin to 4 pin converter if you needed it. (at $1 each...
  14. D

    Need some advice please...

    SaintGeorge Good luck with the system, looks like a sound choice and a much quieter one to... P.S. How about taking orders for your trip to the states, could save me a few quid ;) Just kidding.... Mikki Thanks for that and all the advise, I'm 100% sure it's Intel for me, probably a...
  15. D

    Need some advice please...

    Excellent comments Mikki, you have echoed my thoughts exactly. This is also the current situation I find myself in, about to upgrade my setup from the ground up and cost is not really an issue (within limits of course). I too have spent some weeks gathering info and researching the current...