Recent content by Cyberdemon

I could not find a single setting relating to the USB in the bios and I checked every page (multiple times). I've read around the WinXP with SP1 sometimes flips out with USB 2.0 drivers. None of the ports work. The mobo has 6 on the rear and 2 on the front panel. None do anything with any devices.

I built a PC for my friend recently. The motherboard is an Asus P4S800, which includes 6 USB ports on the mobo and 2 on the front panel connector. I installed the USB 2.0 drivers on WinXP with service pack 1. In the device manager it lists 3 USB Root hubs as well as 3 other entries for the SIS...

No onboard video.

Your mobo would powerup but not actually run? I would think the 350watt would've been ok, esp since no devices were hooked up other then the essentials. I can try a different PSU though and see what happens.

Power connector was plugged in and the vid fan was running. Again, there were no beeps at all. No matter what.

I checked the seating several times. The mobo has a lock that clicks in to make sure the AGP card is totally seated, and I know I had the same problem on my pc. I checked the seating on everything including the ram and CPU. Shouldn't the CPU throw some error beeps? I tried 2 seperate pc...

I'm in the process of building a PC for a friend. The specs are as follows: P4-2.8ghz Corsair 512 mb DDR400 DIMM ATI 9800 Pro 128mb vid card 350 Watt PSU ASUS P4S800 Mobo (SIS 648FX Northbridge) I put these together, and the powerswitch powers up the motherboard and the fans on the CPU and vid...