Recent content by bill00009912

Bandwidth has no effect on ppp or the real physical speed of the interface. It is only used by routing protocols to caclulate metrics and for the QoS options to calculate some ot thier settings. It is nice to have correct but as long as you are consitant it should not cause a issue to not have...

Not sure why you multilink configured when you only have a single link unless you did show both. You can start with debug ppp negotiation and debug ppp multilink events and see if you see anything intersting. There are many options on the debug ppp command just keep turning them on until you...

If you mean the ones that use your house wire to carry data? Ya they work but they are kinda slow but then it depends on how fast your internet is. Another thing to try is to move the modem upstairs. If you have any kind of phone line going upstairs it may work. Unlike ethenet dsl already...

It doesn't work because you are using the destination address after it is translated. Access lists are done before nat so you need to use the real outside address if you know what it is See http://www.cisco.com/en/US/tech/tk648/t...logies_tech_note09186a0080133ddd.shtml